baserev update by copy to link target

• Files Changed
• Browse Source

- Drop requirement on systemd-experimental.
  It's no longer necessary as systemd-repart is no more considered as an
  experimental tool and is now shipped by udev. Also the hard requirement was a
  bit too strong since systemd-repart is only required when building disk
  images.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Add opensuse-dont-install-distribution-release-by-default.patch 

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Correct dependencies after discussions with upstream
  * Requires: systemd-experimental for systemd-repart needed to build disk images
  * Requires: bubblewrap as bbwrap is called during build
  * Requires: zypper
  * Recommends: squashfs, tar, and xz as they are all optional features
  * Remove recommends for tools they no longer support

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Update to 22:
  * We'll now try to delete btrfs subvolumes with btrfs subvolume delete
    first before falling back to recursively deleting the directory.
  * The invoking user is now always mapped to root when running sync
    scripts. This fixes an issue where we would fail when a package
    manager tree or skeleton tree contained a /usr directory as we would
    not have permissions to run mount in the sandbox.
  * We now use qemu's official firmware descriptions to find EDK2/OVMF
    UEFI firmware. Addititionally, QemuFirmware=uefi now boots without
    SecureBoot support, and QemuFirmware=uefi-secure-boot was introduced
    to boot with SecureBoot support. By default we will still boot with
    SecureBoot support if QemuFirmware=auto.
  * Added support for QemuFirmwareVariables=custom and
    QemuFirmwareVariables=microsoft to use OVMF/EDK2 variables with
    either the user's custom keys enrolled or with the Microsoft keys
    enrolled.
  * Added UnifiedKernelImages= to control whether we generate unified
    kernel images or not.
  * Bootloader=grub will now generate a grub EFI image and install it.
    If SecureBoot= is enabled and ShimBootloader= is not set to
    signed, the grub EFI image will be signed for SecureBoot.
  * ShimBootloader=signed will now also instruct mkosi to look for and
    install already signed grub, systemd-boot, kernel and UKI binaries.
  * We now build grub images with a fixed set of modules and don't copy
    any grub modules to the ESP anymore.
  * The configuration is now made available as a JSON file to all mkosi
    scripts via the $MKOSI_CONFIG environment variable.
  * $PROFILE is now set for all mkosi scripts containing the value of
    Profile= if it is set.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Update to 21:
  * We now handle unmerged-usr systems correctly
  * Builtin configs (mkosi-initrd, mkosi-tools) can now be included
    using Include= (e.g. Include=mkosi-initrd)
  * The kernel-install plugin now uses the builtin mkosi-initrd
    config so there's no need anymore to copy the full mkosi-initrd
    config into /usr/lib/mkosi-initrd.
  * We don't require a build anymore for the journalctl and
    coredumpctl verbs.
  * mkosi ssh works again when used with ToolsTree=default
  * We now use .zst instead of .zstd for compressed split artifacts
    produced by systemd-repart.
  * systemd-repart uses a persistent temporary directory again for
    assembling images instead of a tmpfs.
  * Added MicrocodeHost= setting to only include the CPU specific
    microcode for the current host system.
  * The kernel-install plugin now only includes the CPU specific
    microcode
  * Introduced PackageCacheDirectory= to set the directory for
    package manager caches. This setting defaults to a suitable
    location in the system or user directory depending on how mkosi
    is invoked.
  * CacheDirectory= is only used for incremental cached images now.
  * Repository metadata is now synced once at the start of each
    image build and never during an image build. Each image
    includes a snapshot of the repository metadata in the canonical
    locations in /var so that incremental images and extension
    images can reuse the same snapshot. When building an image
    intended to be used with
  * BaseTrees=, disable CleanPackageMetadata= to make sure the

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 20.2:
  * Fixed a bug in signing unsigned shim EFI binaries.
  * We now build an early microcode initrd in the mkosi kernel-
    install plugin.
  * Added `PackageDirectories=` to allow providing extra packages
    to be made available during the build.
  * Fixed issue where `KernelModulesIncludeHost` was including
    unnecessary modules
  * Fixed `--mirror` specification for CentOS (and variants) and
    Fedora.
  * Previously a subdirectory within the mirror had to be
    specified which prevented using CentOS and EPEL repositories
    from the same mirror. Now only the URL has be specified.
  * We now mount package manager cache directories when running
    scripts on the host so that any packages installed in scripts
    are properly cached.
  * We don't download filelists on Fedora anymore
  * Nested build sources don't cause errors anymore when trying
    to install packages.
  * We don't try to build the same tools tree more than once
    anymore when building multiple images.
  * We now create the `/etc/mtab` compatibility symlink in
    mkosi's sandbox.
  * We now always hash the root password ourselves instead of
    leaving it to `systemd-firstboot`.
  * `/srv` and `/mnt` are not mounted read-only anymore during
    builds.
  * Fixed a crash when running mkosi in a directory with fewer
    than two parent directories.
  * Implemented `RepositoryKeyCheck=` for apt-based

• Files Changed
• Browse Source

- update to 20.1:
  * `BuildSources=` are now mounted when we install packages so
    local packages can be made available in the sandbox.
  * Fixed check to see if we're running as root which makes sure
    we don't do shared mounts when running as root.
  * The extension release file is now actually written when
    building system or configuration extensions.
  * The nspawn settings are copied to the output directory again.
  * Incremental caching is now skipped when `Overlay=` is enabled
    as this combination isn't supported.
  * The SELinux relabel check is more granular and now checks for
    all required files instead of just whether there's a policy
    configured.
  * `qemu-system-xxx` binaries are now preferred over the generic
    `qemu` and `qemu-kvm` binaries.
  * Grub tools from the tools tree are now used to install grub
    instead of grub tools from the image itself. The grub tools
    were added to the default tools trees as well.
  * The pacman keyring in tools trees is now only populated from
    the Arch Linux keyring (and not the Debian/Ubuntu ones anymore).
  * `gpg` is allowed to access `/run/pscsd/pscsd.comm` on the
    host if it exists to allow interaction with smartcards.
  * The current working directory is not mounted unconditionally
    to `/work/src` anymore. Instead, the default value for
    `BuildSources=` now mounts the current working directory
    to `/work/src`. This means that the current working directory
    is no longer implicitly included when `BuildSources=` is
    explicitly configured.
  * Assigning the empty string to a setting that takes a list of
    values now overrides any configured default value as well.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

Mon Nov  20 09:21:06 UTC 2023 - Fredrik Lönnegren <fredrik.lonnegren@suse.com>
- update to v19:
  * Support for RHEL was added!
  * Added journalctl and coredumpctl verbs for running the respective tools on
    built directory or disk images.
  * Added a burn verb to write the output image to a block device.
  * Added a new esp output format, which is large similar to the existing uki
    output format but wraps it in a disk image with only an ESP.
  * Presets were renamed to Images. mkosi.images/ is now used instead of
    mkosi.presets/, the Presets= setting was renamed to Images= and the Presets
    section was merged into the Config section. The old names can still be used
    for backwards compatibility.
  * Added profiles to support building variants of the same image in one
    repository. Profiles can be defined in mkosi.profiles/ and one can be
    selected using the new Profile= setting.
  * mkosi will now parse mkosi.local.conf before any other config files if that
    exists.
  * Added a kernel-install plugin. This is only shipped in source tree and not
    included in the Python module.
  * Added a --json option to get the output of mkosi summary as JSON.
  * Added shorthand -a for --autologin.
  * Scripts with the .chroot extension are now executed in the image
    automatically.
  * Added rpm helper script to have rpm automatically operate on the image when
    running scripts.
  * Added mkosi-as-caller helper script that can be used in scripts to run
    commands as the user invoking mkosi.
  * mkosi-chroot will now start a shell if no arguments are specified.
  * Added WithRecommends= to configure whether to install recommended packages
    by default or not where this is supported. It is disabled by default.
  * Added ToolsTreeMirror= setting for configuring the mirror to use for the
    default tools tree.
  * WithDocs= is now enabled by default.
  * Added BuildSourcesEphemeral= to make source directories ephemeral when
    running scripts. This means any changes made to source directories while
    running scripts will be undone after the scripts have finished executing.
  * Added QemuDrives= to have mkosi create extra qemu drives and pass them to
    qemu when using the qemu verb.
  * Added BuildSources= match to match against configured build source targets.
  * PackageManagerTrees= was moved to the Distribution section.
  * We now automatically configure the qemu firmware, kernel cmdline and initrd
    based on what type of kernel is passed by the user via -kernel or
    QemuKernel=.
  * The mkosi repository itself now ships configuration to build basic bootable
    images that can be used to test mkosi.
  * Added support for enabling updates-testing repositories for Fedora.
  * GPG keys for CentOS, Fedora, Alma and Rocky are now looked up locally first
    before fetching them remotely.
  * Signatures are not required for local packages on Arch anymore.
  * Packages on opensuse are now always downloaded in advance before
    installation when using zypper.
  * The tar output is now reproducible.
  * We now make sure git can be executed from mkosi scripts without running
    into permission errors.
  * We don't create subdirectories beneath the configured cache directory anymore.
  * Workspace directories are now created outside of any source directories.
    mkosi will either use XDG_CACHE_HOME, $HOME/.cache or /var/tmp depending on
    the situation.
  * Added environment variable MKOSI_DNF to override which dnf to use for
    building images (dnf or dnf5).
  * The rootfs can now be modified when running build scripts (with all changes
    thrown away after the last build script has been executed).
  * mkosi now fails if configuration specified via the CLI does not apply to
    any image (because it is overridden).
  * Added a new doc on building rpms from source with mkosi
    (docs/building-rpms-from-source.md).
  * /etc/resolv.conf will now only be mounted for scripts when they are run
    with network access.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- set singlepython version to python3 instead of python311 to allow build on Leap and not require changes on every Python change in Tumbleweed

• Files Changed
• Browse Source

Update changelog to include versions 15.1, 16, 17, 17.1

Remove python_subpackages to fix Provides.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to v14:
  * mkosi now creates distro~release subdirectories inside the build, cache
    and output directories for each distro~release combination that is
    built. This allows building for multiple distros without throwing away
    the results of a previous distro build every time.
  * The preferred names for mkosi configuration files and directories are
    now mkosi.conf and mkosi.conf.d/ respectively. The old names
    (mkosi.default and mkosi.default.d) have been removed from the docs but
    are still supported for backwards compatibility.
  * plain_squashfs type images will now also be named with a .raw suffix.
  * tar type images will now respect the --compress option.
  * Pacman's SigLevel option was changed to use the same default value as
    used on Arch which is SigLevel = Required DatabaseOptional. If this
    results in keyring errors, you need to update the keyring by running
  * Support for CentOS 7 was dropped. If you still need to support CentOS 7,
    we recommend using any mkosi version up to 13.
  * Support for BIOS/grub was dropped. because EFI hardware is widely
    available and legacy BIOS systems do not support the feature set to
    fully verify a boot chain from firmware to userland and it has become
    bothersome to maintain for little use.
  * To generate BIOS images you can use any version of mkosi up to mkosi 13
    or the new --bios-size option. This can be used to add a BIOS boot
    partition of the specified size on which grub (or any other bootloader)
    can be installed with the help of mkosi's script support (depending on
    your needs most likely mkosi.postinst or mkosi.finalize). This method
    can also be used for other EFI bootloaders that mkosi intentionally does
    not support.
  * mkosi now unconditionally copies the kernel, initrd and kernel cmdline
    from the image that were previously only copied out for Qemu boot.
  * mkosi now runs apt and dpkg on the host. As such, we now require apt and

• Files Changed
• Browse Source