Revisions of pulseaudio
Ondrej Holecek (oholecek)
accepted
request 607629
from
Ondrej Holecek (oholecek)
(revision 189)
Remove _service based file checksum verification
Tomáš Chvátal (scarabeus_iv)
accepted
request 607607
from
Ondrej Holecek (oholecek)
(revision 188)
- Update to 12 RC1 (11.99.1) * Much more accurate latency reporting for AirPlay devices * module-switch-on-connect now ignores virtual devices * When using passthrough for compressed audio, set the "non-audio" bit * Prioritize HDMI output over S/PDIF output * HSP support for more bluetooth headsets * Choose the A2DP bluetooth profile by default instead of HSP * New "sink_input_properties" module argument for module-ladspa-sink * New "use_system_clock_for_timing" module argument for module-pipe-sink * Steelseries Arctis 7 USB headset stereo output support * Dell Thunderbolt Dock TB16 speaker jack support * Fixed digital input support for some USB sound cards * Ability to disable input or output on macOS * New "dereverb" option for the Speex echo canceller * New module: module-always-source * State files not any more readable by all users in the system mode * module-augment-properties now uses XDG_DATA_DIRS to find .desktop files * The GConf dependency can now be avoided * qpaeq license changed from AGPL to LGPL * qpaeq ported to Qt 5 - Add subpackage module-gsettings (conflicts with module-gconf) - Remove support for obsolete Bluez4 - Fix build phase running configure twice - Removed patches: 0001-alsa-fix-infinite-loop-with-Intel-HDMI-LPE.patch 0002-alsa-mixer-add-hw_device_index-to-pa_alsa_mapping.patch 0003-alsa-mixer-autodetect-the-HDMI-jack-PCM-device.patch 0004-alsa-mixer-autodetect-the-ELD-device.patch pulseaudio-glibc2.27.patch - Added patch:
Takashi Iwai (tiwai)
accepted
request 598529
from
Frederic Crozat (fcrozat)
(revision 187)
- Add Supplements: packageand on zeroconf, lirc, bluetooth subpackages to have them selected for installation automatically instead of relying on patterns (bsc#1087207).
Takashi Iwai (tiwai)
accepted
request 583452
from
Takashi Iwai (tiwai)
(revision 186)
- Fix the wrongly suspended sinks due to the previous patch (bsc#1084047): refreshed 0001-alsa-fix-infinite-loop-with-Intel-HDMI-LPE.patch
Takashi Iwai (tiwai)
accepted
request 581681
from
Takashi Iwai (tiwai)
(revision 185)
- Fix the crash with Intel LPE HDMI audio (bsc#1083195): 0001-alsa-fix-infinite-loop-with-Intel-HDMI-LPE.patch 0002-alsa-mixer-add-hw_device_index-to-pa_alsa_mapping.patch 0003-alsa-mixer-autodetect-the-HDMI-jack-PCM-device.patch 0004-alsa-mixer-autodetect-the-ELD-device.patch
Takashi Iwai (tiwai)
accepted
request 581119
from
Takashi Iwai (tiwai)
(revision 184)
- Abort PA process at session exit properly (bsc#1052437): pa-set-exit-idle-time-to-0-when-we-detect-a-session.patch
Tomáš Chvátal (scarabeus_iv)
accepted
request 576992
from
Dominique Leuenberger (dimstar)
(revision 183)
Fix build with glibc2.27 - boo#1081023
Tomáš Chvátal (scarabeus_iv)
accepted
request 544710
from
Richard Brown (RBrownSUSE)
(revision 182)
Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468)
Tomáš Chvátal (scarabeus_iv)
accepted
request 527246
from
Ondrej Holecek (oholecek)
(revision 181)
- Update to 11.1
* Fix a crash in filter modules related to flat volumes and volume
sharing
* Fix a crash when the bluetooth adapter reports weird MTU size
* Disable bluetooth MTU autodetection by default
* Add mixer handling back for hardware that doesn't have any alsa-lib
configuration
* Prioritize USB devices over built-in sound cards (11.0 was supposed
to have this feature, but the implementation turned out to be
incomplete)
Tomáš Chvátal (scarabeus_iv)
accepted
request 521140
from
Ondrej Holecek (oholecek)
(revision 180)
- Update to 11 (11.0) * The default sink and source configuration is remembered better * https://www.freedesktop.org/wiki/Software/PulseAudio/Notes/11.0/
Tomáš Chvátal (scarabeus_iv)
accepted
request 512916
from
Ondrej Holecek (oholecek)
(revision 179)
- Fix Requires(post) and Requires(pre) mixup
Tomáš Chvátal (scarabeus_iv)
accepted
request 512909
from
Ondrej Holecek (oholecek)
(revision 178)
- Update to 11 RC1 (10.99.1)
* Support for newer AirPlay hardware
* USB and bluetooth devices preferred over internal sound cards
* Bluetooth HSP headset role implemented
* Bluetooth HFP audio gateway role implemented (requires oFono)
* Bluetooth HSP audio gateway and HFP hands-free unit roles can
be enabled simultaneously
* Upmixing can now be disabled without bad side effects
* Avoid having unavailable sinks or sources as the default
* Option to avoid resampling more often
* Option to automatically switch bluetooth profile to HSP more often
* Better latency control in module-loopback
* Changed module argument names in module-ladspa-sink and
module-virtual-surround-sink
* Fixed input device handling in module-waveout
* Improved bluetooth MTU configuration (warning! this causes some
hardware to not work any more, see the details below for how to fix it)
* Applications can request LADSPA or virtual surround filtering for
their streams
* Support for 32-bit applications on 64-bit systems in padsp
- add --with-pulsedsp-location='/usr/\\$$LIB/pulseaudio' to enable
upstream padsp multiarch fix
- remove patch4 padsp-biarch.patch, fixed upstream
- remove patch5 pulseaudio-vala-0.36.patch, fixed upstream
Ondrej Holecek (oholecek)
accepted
request 479214
from
Thorsten Kukuk (kukuk)
(revision 176)
- Prerequire group audio
Tomáš Chvátal (scarabeus_iv)
accepted
request 479105
from
Dominique Leuenberger (dimstar)
(revision 175)
Fix vapi bindings for usage with vala 0.36
Tomáš Chvátal (scarabeus_iv)
accepted
request 451370
from
Ondrej Holecek (oholecek)
(revision 174)
- Update to 10.0 * Fixed hotplugging support for USB surround sound cards * Clarified qpaeq license * https://www.freedesktop.org/wiki/Software/PulseAudio/Notes/10.0/
Tomáš Chvátal (scarabeus_iv)
accepted
request 448716
from
Ondrej Holecek (oholecek)
(revision 173)
- Update to 10 RC1 (9.99.1) * Automatically switch Bluetooth profile when using VoIP applications * New module for prioritizing passthrough streams (module-allow-passthrough) * Improvements to module-loopback * Separate volumes for Bluetooth A2DP and HSP profiles * memfd-based shared memory mechanism enabled by default * Removed module-xenpv-sink * Dropped dependency to json-c * When using systemd to start PulseAudio, pulseaudio.socket is started first * Compatibility with OpenSSL 1.1.0 - Removed BuildRequires pkgconfig(json)
Ismail Dönmez (namtrac)
accepted
request 424798
from
Bjørn Lie (Zaitor)
(revision 172)
oFono was removed with the reason that it didn't exist in distro. - that is correct for 13.2, but oFono is available for both Leap and TW. I've not put in a Requires or Recommends for ofono as of now, we could/should perhaps do that
Takashi Iwai (tiwai)
accepted
request 404240
from
Ondrej Holecek (oholecek)
(revision 171)
- Update to 9.0
* Automatic routing improvements
* Beamforming and various other new features in the WebRTC echo
canceller
* Various improvements in module-role-cork and module-role-ducking
* LFE remixing disabled by default
* memfd-backed shared memory transport
* Support for sample rates up to 384 kHz
* webrtc-audio-processing dependency minimum version bumped to 0.2
* Changed the C standard from C99 to C11.
- Updated depencency webrtc-audio-processing to 0.3
- Update to 9.0 RC2 (8.99.2)
- Update to 9.0 RC1 (8.99.1)
+ memfd support (off by default)
+ refinements to automatic switching to HDMI outputs
+ improvements to our echo canceller (including the addition of
beamforming)
+ lots of other changes
- Updated dependency webrtc-audio-processing >= 0.2
- Do not mark shell completion includes as configs (solves some
rpmlint warnings)
Takashi Iwai (tiwai)
accepted
request 390178
from
Takashi Iwai (tiwai)
(revision 170)
- Use /etc/pulse/client.conf.d/50-system.conf as a system setup by setup-pulseaudio script instead of modifying the global config.
Displaying revisions 81 - 100 of 269
