Revisions of libqmi

Dirk Mueller's avatar Dirk Mueller (dirkmueller) accepted request 1141032 from Eugenio Paolantonio's avatar Eugenio Paolantonio (epaolantonio) (revision 51)
- Add patch:
  * 0001-message-fix-16bit-service-on-big-endian.patch
    - Fixes 16-bit service indications on big endian architectures.
      Cherry-picked from upstream qmi-1-34 branch
Dirk Mueller's avatar Dirk Mueller (dirkmueller) committed (revision 50)
- update to update to 1.34.0:
  * New services:
    ** New 'ATR' service to support AT commands over QMI,
    defined by Telit, including "Send" request and "Received"
    indication.
    ** New 'IMS' service, including "Get IMS Services Enabled
    Setting" request/response.
    ** New 'IMSA' (IMS Application) service, including "Get
    IMS Registration Status" and "Get IMS Services Status"
    request/responses.
    ** New 'IMSP' (IMS Presence) service, including "Get
    Enabler State" request/response.
    ** New 'SSC' service (Qualcomm Snapdragon Sensor Core),
    including the "Control" request/response, and
    "Report Small"/"Report Large" indications.
    ** nas: added the "WCDMA RSCP" TLV in "Get Signal Info"
    response and "Signal Info" indication.
    ** wds: added the "Report Profile Changes" TLV in
    ** Support for 16-bit service ids added, used in the QRTR
    backend.
    ** Response and indication parser messages are now
    published in the API.
    ** The library now allows connecting to a unix domain
    socket named 'qmux_socket' instead of a device file.
    ** Extended the 'QmiWdsProfileType' enum type with EPC and
    ALL values.
    ** Extended the
    'QmiUimCardApplicationPersonalizationFeature' enum type with
     additional GW-related values.
    ** New 'QmiUimCardApplicationPersonalizationFeatureStatus'
Martin Hauke's avatar Martin Hauke (mnhauke) accepted request 1077051 from Bjørn Lie's avatar Bjørn Lie (iznogood) (revision 49)
- Update to version 1.32.4:
  * libqmi-glib: Schedule indications with G_PRIORITY_DEFAULT to
    ensure correct processing order between responses and
    ndications.
  * build: If QRTR enabled the pkg-config should publicly require
    libqrtr-glib.
- Changes from version 1.32.2:
  * libqmi-glib: fixed message header validation to avoid reading
    out of bounds.
  * qmi-proxy: added --verbose-full flag to allow printing logs
    with personal info included.
- Changes from version 1.32.0:
  * There is no longer an upstream-provided source tarball, please
    use the signed git tag '1.32.0' instead to refer to the sources
    of this release.
  * The verbose message logging will now by default hide all fields
    that are considered personal information. Extended message
    logging including all field contents should be explicitly
    requested.
  * Build:
    - The GNU autotools (autoconf/automake/libtool) support has
      been fully removed, this release requires the use of the
      meson build system.
    - The 'instrospection' meson option is now a boolean.
    - New boolean 'man' meson option to allow disabling the man
      page generation.
  * New services: New 'FOX' service for operations defined by
    Foxconn, including "Get Firmware Version" for now.
  * qmicli:
    - New '--verbose-full' option to request enabling logs that
      include personal information.
    - New '--pdc-monitor-refresh' command.
    - New '--gas-dms-set-usb-composition' and
      '--gas-dms-get-usb-composition' commands.
    - New '--wms-set-routes' command.
    - New '--dsd-get-system-status' command.
    - Updated the '--wda-set-data-format' command with new optional
      fields to configure the uplink data aggregation max size and
      max datagrams.
  * Several other minor improvements and fixes.
- Switch to meson buildsystem, add meson BuildRequires and macros.
- Add help2man, pkgconfig(bash-completion) and
  pkgconfig(gobject-introspection-1.0) BuildRequires: New
  dependencies.
- Use ldconfig_scriptlets macro.
- New home, URL and Source.
- Drop sig and keyfile, no longer available.
Dirk Mueller's avatar Dirk Mueller (dirkmueller) accepted request 989844 from Dirk Mueller's avatar Dirk Mueller (dirkmueller) (revision 48)
- update to 1.30.8:
  * dms: new 'Foxconn FCC authentication v2' request/response.
Marcus Meissner's avatar Marcus Meissner (msmeissn) accepted request 979246 from Callum Farmer's avatar Callum Farmer (gmbr3) (revision 47)
- Enable QRTR support
Martin Hauke's avatar Martin Hauke (mnhauke) accepted request 954415 from Dirk Mueller's avatar Dirk Mueller (dirkmueller) (revision 45)
- update to 1.30.4:
   ** meson: switch to use the new python module in meson.
   ** meson: added a new boolean 'man' option in the meson setup to explicitly
      enable or disable building the man pages.
   ** meson: removed the option to detect if rmnet is supported.
   ** meson: multiple updates to use newer meson features like install_dir(),
      install_mode() or summary().
   ** meson: options 'mbim_qmux' and 'qrtr' are enabled by default and must be
      explicitly disabled if they're not needed, there is no attempt to
      autodetect whether they can be enabled or not.
 * qmi-proxy:
   ** Remove assert when attempting to close ghost device.
 * qmi-firmware-update:
   ** Use defaults if FLASH variables not reported, enabling support to flash
      the new Sierra Wireless EM9190 and EM9191 modules.
 * Several other minor improvements and fixes.
Martin Hauke's avatar Martin Hauke (mnhauke) accepted request 941724 from Martin Hauke's avatar Martin Hauke (mnhauke) (revision 44)
- Mention libqmi.keyring
Martin Hauke's avatar Martin Hauke (mnhauke) accepted request 941713 from Dirk Mueller's avatar Dirk Mueller (dirkmueller) (revision 43)
- update to 1.30.2:
  * libqmi-glib:
     ** Added support for 'hsic', 'bam-dmux' and 'unknown' endpoint types.
     ** Added support for QMAPv2, QMAPv3 and QMAPv4 data aggregation types.
     ** Added support for 'NGRAN' access technology identifier.
     ** New 'qmi_device_add_link_with_flags()' method, in order to give e.g. rmnet
	specific checksum offload related flags when creating a new link.
   * qmicli:
     ** New '--nas-get-preferred-networks' command.
     ** New '--nas-set-preferred-networks' command.
     ** New '--uim-get-configuration' command.
     ** New '--uim-depersonalization' command.
     ** New '--wms-get-routes' command.
     ** New '--dpm-open-port' command.
     ** New '--dpm-close-port' command.
     ** Updated '--wds-create-profile' with an additional 'apn-type-mask' setting.
     ** Updated '--wds-modify-profile' with an additional 'apn-type-mask' setting.
     ** Updated '--link-add' with an additional optional 'flags' setting.
   * qmi-network:
     ** New PROFILE configuration setting to allow specifying which WDS profile to
	use when connecting.
     ** New IP-TYPE configuration setting to allow selecting the IP type requested
   * collections:
     ** basic: added voice call management operations.
     ** basic: added voice supplementary service related operations.
     ** basic: added NAS preferred networks related operations.
     ** basic: added NAS network reject indications.
     ** basic: added UIM depersonalization related operations.
   * Several other minor improvements and fixes.
- add gpg validation
Marcus Meissner's avatar Marcus Meissner (msmeissn) accepted request 914224 from Martin Hauke's avatar Martin Hauke (mnhauke) (revision 42)
- Update to version 1.28.8
  * libqmi-glib:
    - Fix CTL "Set Data Format" output TLV prerequisites.
    - Fix double free in the qmiwwan based net port manager.
Dirk Mueller's avatar Dirk Mueller (dirkmueller) accepted request 897671 from Martin Hauke's avatar Martin Hauke (mnhauke) (revision 41)
- Update to version 1.28.6
  * New request/responses:
    - dms: implement "Foxconn Set FCC authentication"
      request/response.
  * libqmi-glib:
    - Fix transport detection in the 'wwan' subsystem.
  * build:
    - Fix build with GCC 11 and -Wincompatible-pointer-types.
  * Several other minor improvements and fixes.
Dirk Mueller's avatar Dirk Mueller (dirkmueller) accepted request 893278 from Martin Hauke's avatar Martin Hauke (mnhauke) (revision 40)
- Update to version 1.28.4
  * libqmi-glib:
    - Add 'wwan' subsystem support.
    - Plug memleak when allocating new links.
    - Plug memleak when QmiDevice is opened multiple times.
    - Fix build when ARPHRD_RAWIP isn't defined in libc.
  * gir:
    - Flag all output TLV readers as optional.
    -  Add explicit ownership information in the string and
       struct return annotations.
  * collections:
    - basic: added WMS Send ACK
  * qmicli:
    - Fix double GError when both 'Extended List' and 'Bandwidth
      List' are missing in --nas-get-rf-band-info.
  * Several other minor improvements and fixes.
Marcus Meissner's avatar Marcus Meissner (msmeissn) accepted request 876050 from Martin Hauke's avatar Martin Hauke (mnhauke) (revision 39)
- Update to version 1.28.2
  * libqmi-glib:
  + Fixed build with GLib < 2.58.
  + Simplified the qmi_wwan add_mux/del_mux logic assuming there
    is no delay in the creation and deletion of the net links.
Martin Hauke's avatar Martin Hauke (mnhauke) accepted request 874481 from Paolo Stivanin's avatar Paolo Stivanin (polslinux) (revision 38)
- update to 1.28.0: 
 * The QmiDevice interfaces to work with the expected data format and the wwan
   interface name should now be considered to be specific to QMI devices exposed
   by the upstream 'qmi_wwan' kernel driver. If the device is exposed with a
   different driver (e.g. PCIe or QRTR) these methods will always fail.
 * The QmiDevice now supports configuring the 'pass_through' sysfs setting in
   the network interfaces exposed by the 'qmi_wwan' kernel driver, with a new
   'qmap-pass-through' expected data format type. In this mode, the network
   device will be managed by the rmnet kernel driver. A new method is also
   provided to check in runtime whether a given expected data format value is
   supported by the kernel or not.
 * The QmiDevice now includes methods to list, create and delete links on the
   network interface, that can be used to setup QMAP based multiplexing of
   different data streams, e.g. connected to different APNs. When using the
   'qmi_wwan' kernel driver, the link management logic depends on the configured
   expected data format:
     ** rmnet netlink operations will be used if 'qmap-pass-through' expected
        data format is configured.
     ** add_mux/del_mux operations will be used if 'raw-ip' expected data format
        is configured.
 * New services:
   ** New 'SAR' (Specific Absorption Rate) service, with support for the "Set RF
      State" and "Get RF State" request/responses.
 * New request/response/indications:
   ** uim: implement "Refresh Register" request/response.
   ** uim: implement "Refresh Register All" request/response.
   ** uim: implement "Refresh Complete" request/response.
   ** uim: implement "Refresh" indication.
   ** loc: implement "Get Engine Lock" request/response.
   ** loc: implement "Set Engine Lock" request/response.
   ** nas: implement "Get DRX" request/response.
   ** nas: implement "Get PLMN Name" request/response.
   ** wms: implement "Send Ack" request/response.
   ** wds: implement "Bind Data Port" request/response.
   ** wds: implement "Get Max LTE Attach PDN Number" request/response.
   ** wds: implement "Get LTE Attach PDN List" request/response.
   ** wds: implement "Set LTE Attach PDN List" request/response.
   ** wds: implement "Set LTE Attach PDN List" indication.
   ** wds: implement "Get LTE Attach Parameters" request/response.
   ** wds: renamed "Get Default Profile Num" to "Get Default Profile Number",
      and provided compat symbols to avoid breaking API.
   ** wds: renamed "Set Default Profile Num" to "Set Default Profile Number",
      and provided compat symbols to avoid breaking API.
 * New TLVs supported in existing messages:
   ** nas: added the "Rx Chain 2/3 Info" TLVs in "Get Tx Rx Info".
   ** nas: added the "LTE Info Timing Advance" TLV in "Get Cell Location Info".
   ** nas: added the "LTE Voice Domain", "CDMA Registration Zone ID", "GSM
      Routing Area Code", "WCDMA Routing Area Code" and "CDMA Resolved MCC"
      TLVs in "Get System Info".
 * libqmi-glib:
   ** Added support for 'embedded' and 'pcie' endpoint types.
   ** Added support for QMAPv5 data aggregation type.
 * qmicli:
   ** When built with QRTR support, the '--device' option now allows QRTR URIs
      (e.g. 'qrtr://0').
   ** New '--link-list', '--link-add', '--link-delete' and '--link-delete-all'
      commands.
   ** New '--uim-monitor-refresh-file' command.
   ** New '--uim-monitor-refresh-all' command.
   ** New '--wds-bind-data-port' command.
   ** New '-loc-get-operation-mode' and '--loc-set-operation-mode' commands.
   ** New '-loc-get-engine-lock' and '--loc-set-engine-lock' commands.
   ** New '--wds-get-lte-attach-parameters' command.
   ** New '--wds-get-max-lte-attach-pdn-num' command.
   ** New '--wds-get-lte-attach-pdn-list' and '--wds-set-lte-attach-pdn-list'
      commands.
   ** Updated the '--wds-start-network' command with a timeout of 180s.
   ** Updated the '--wds-stop-network' command with a timeout of 120s.
   ** Updated the '--dms-set-firmware-preference' command to use a key-value
      pair based input instead of predefined fields.
 * collections:
   ** basic: added UIM event registration commands.
   ** basic: added UIM slot management commands.
   ** basic: added UIM refresh related commands.
   ** basic: added WDS bind data port commands.
   ** basic: added WDS initial LTE bearer management commands.
   ** basic: added NAS PLMN name commands.
Dirk Mueller's avatar Dirk Mueller (dirkmueller) accepted request 862128 from Martin Hauke's avatar Martin Hauke (mnhauke) (revision 37)
- update to 1.26.8:
  * libqmi-glib:
    + Fix proxy segfault when accessing length of NULL GArray.
    + Add "Release USSD" indication to Basic collection.
  * qmicli:
    + Fix element types used in "NAS Get Cell Location Info".
  * Several other minor improvements and fixes.
Martin Hauke's avatar Martin Hauke (mnhauke) accepted request 840129 from Martin Hauke's avatar Martin Hauke (mnhauke) (revision 36)
- update to 1.26.6:
 * libqmi-glib:
   + New TLV read APIs added in "NAS Get Cell Location Info" so
     that BCD encoded PLMN strings are read as arrays instead of
     as UTF-8 validated strings.
   + Allow TAB characters as printable in strings.
 * qmicli:
   + report EcIo, RSRP and phase for 5GNR in "NAS Get TX/RX Info".
 * Several other minor improvements and fixes.
Dirk Mueller's avatar Dirk Mueller (dirkmueller) committed (revision 35)
- update to 1.26.4:
 * Added new message collections support, so that users can select which
   messages to include in the built library during configure with the
   --enable-collection option. Three predefined sets are given:
   ** minimal: the bare minimum messages required to control connectivity.
   ** basic: all messages and indications that ModemManager requires.
   ** full: all supported messages and indications.
   Users can install custom collections under data/ and reference them in
   the same way as the predefined sets. E.g. installing a new
   data/qmi-collection-custom.json set can be enabled during configure with
   --enable-collection=custom.
 * Added new GObject Introspection support in the library
 * Implemented new QRTR backend support, disabled by default. This new backend
   allows to perform QMI operations on systems with the Qualcomm IPC router
 * Added 5GNR radio access technology support, with new enum values in both the
   DMS and NAS services.
 * New services:
   ** New 'GMS' (Telit General Modem Service) service, for now just implementing
      basic test get/set value commands.
   ** New 'DSD' (Data System Determination) service, implementing methods to get
      and set default bearer APN settings.
 * New request/response/indications:
   ** dms: implement "Get MAC Address" request/response.
   ** dms: renamed "Dell Get Firmware Version" to "Foxconn Get Firmware Version"
      as the command applies not only to the Dell-branded variant, but also to
      the generic Foxconn-branded models. The old APIs are kept available but
      flagged as deprecated.
   ** loc: implement "Set NMEA Types" request/response.
   ** loc: implement "Get NMEA Types" request/response.
   ** uim: implement "Switch Slot" request/response.
Lars Vogdt's avatar Lars Vogdt (lrupp) accepted request 810347 from Martin Hauke's avatar Martin Hauke (mnhauke) (revision 34)
- Update to version 1.24.14:
  * libqmi-glib:
    - Fix build with GLib < 2.44.
    - Fix UTF-8 string validation when the string contains a
      trailing NUL byte (e.g. the Sierra specific "DMS Swi Get
      Current Firmware" command).
Dirk Mueller's avatar Dirk Mueller (dirkmueller) accepted request 802240 from Martin Hauke's avatar Martin Hauke (mnhauke) (revision 33)
- Update to version 1.24.12:
  * libqmi-glib:
    - Skip UTF-8 validation on 0xFF suffix that may happen in
      fixed sized strings (e.g. 2-digit MNC value in 3-byte fixed
      sized field).
    - Explicitly allow CR and LF as valid characters in strings
      (e.g. when given in NMEA trace indications).
  * qmi-proxy:
    - Fix loss of last requests on client hangup.
    - Fix missing indication/removal signal handling in clients.
    - Fix forwarding of broadcast indications to all clients.
  * Several other minor improvements and fixes.
Marcus Meissner's avatar Marcus Meissner (msmeissn) accepted request 792975 from Martin Hauke's avatar Martin Hauke (mnhauke) (revision 32)
- Update to version 1.24.10:
  + libqmi-glib:
    - Added new WDS verbose call end reasons in the IPv6, PPP,
      3GPP, CM and Internal groups.
    - Renamed WDS verbose call end reason "CM_CONFIGURATION_FAILED"
      to "CM_CONFERENCE_FAILED", and added the old name as
      deprecated in the compat sources.
    - Detect QMI control ports exposed as 'smdpkt' or 'rpmsg'
      virtual devices. 
  + qmicli:
    - Fixed crash when using --pdc-deactivate-config.
  + Several other minor improvements and fixes.
Displaying revisions 1 - 20 of 51
openSUSE Build Service is sponsored by