baserev update by copy to link target

• Files Changed
• Browse Source

- Update to version 4.1:
  * Version 4.1
  * phc2sys: Fix -n option with -w.
  * phc2sys: Avoid segfault with default UDS address.
  * phc2sys: Improve logging with single domain.
  * ptp4l man: Add description for setting kthreads priorities
  * sk: don't report random errno on timeout
  * phc_ctl: explicitly check for adjust_phase definition
  * raw: Fix PRP trailer detection
  * remove C99 style loop variable declarations
  * phc2sys: Add multi-domain synchronization.
  * phc2sys: Shallow do_loop().
  * phc2sys: Create pmc agent after processing options.
  * phc2sys: Rename phc2sys_private to domain.
  * Use the 802.1AS peer delay computation when transportSpecific is 1
  * Resolve false hybrid_e2e warning
  * Fix SERVO_LOCKED_STABLE behavior.
  * Version 4.0
  * clock: Fix summary interval in free-running mode.
  * Avoid switching PHC when phc_index is negative
  * ts2phc: Fix memory leak on initial error path.
  * power profile: Fix regression in the default configuration file.
  * msg: append TLV onto all PTP event messages
  * Fix detection of VLAN over bond support in case the driver does not support SIOCGHWTSTAMP ioctl.
  * Clear pending errors on sockets.
  * ntpshm: Invalidate SHM data before releasing the servo
  * lstab: Update leapfile validity
  * port: Don't switch to PHC with SW timestamping.
  * ts2phc: Fix potential null-pointer dereference
  * ts2phc: Prevent reporting poll error when received termination signal

• Files Changed
• Browse Source

Automatic systemd hardening effort by the security team. This has not been tested. For details please see https://en.opensuse.org/openSUSE:Security_Features#Systemd_hardening_effort

• Files Changed
• Browse Source

• Files Changed
• Browse Source

- Update to version 3.1.1:
  * Version 3.1.1
  * tc: Fix length of follow-up message of one-step sync. (bsc#1187647, CVE-2021-3571)
  * Validate the messageLength field of incoming messages. (bsc#1187646, CVE-2021-3570)

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Update to version 3.1:
  * ts2phc: nmea: Drop time of day readings older than five seconds.
  * ts2phc: nmea: Update the leap seconds table on demand.
  * ts2phc: nmea: Add a configuration option for the current leap seconds file.
  * ts2phc: nmea: Add error messages for leap second lookup failures.
  * ts2phc: nmea: Correct UTC to TAI conversion.
  * posix_clock_open: derive PHC index from device name if possible
  * phc_ctl: display all capability information
  * ts2phc: Ignore pulses with invalid time stamps.
  * ts2phc: Fix memory leak.
  * ts2phc: Use proper close method on the error path.
  * port: Support slave event monitoring of delay timing data.
  * monitor: Add support for slave delay timing data TLV.
  * pmc: Show slave receive timing data TLVs attached to signaling messages.
  * port: Support slave event monitoring of Sync timing data.
  * clock: Create a slave event monitor.
  * Introduce a module for slave event monitoring.
  * Reject path trace TLVs with excessive elements.
  * Let the free running port state reflect the synchronization uncertain flag.
  * pmc: Support getting and setting the local synchronization uncertain flag.
  * Implement the synchronization uncertain flag.
  * Add support for write phase mode.
  * Decouple servo state from automotive profile.
  * ts2phc: Support using a GPS radio as the master clock.
  * Introduce a leap second table.
  * ts2phc: Support using a PHC as the master clock.
  * Introduce the ts2phc program.
  * pmc: Allow multiple local subscribers.
  * pmc: Subscribe to port state push notification events when requested.
  * clock: reset master/local rr when best clock id changes
  * unicast: Enable sharing master tables between ports.
  * Accept external PHC devices from the command line.
  * phc2sys: Fix frequency estimation when synchronizing a PHC to the system clock.
  * Correct the signature of the legacy system offset measurement method.
  * ptp4l: Add configuration option for socket priority
  * sk: Recognize HWTSTAMP_FILTER_SOME
  * Improve G.8275.[12] example configs.
  * rtnl: add team activebackup support
  * Ignore signaling messages on target port mismatch.
  * Avoid fault when receiving zero length packets
  * phc2sys: Fix crash when trying to synchronize unadjustable clock.
  * Added support for opening POSIX clock devices
  * Allow ignoring source port identity in end to end mode.
  * port: correction of port name used port_open
  * Add example configuration for Automotive Profile.
  * Add ignore_source_id config option.
  * Add inhibit_announce config option.
  * Add BMCA config option.
  * port: Add configurable option to set asCapable.
  * timemaster: Allow ptp4l-specific sections in [ptp4l.conf].
  * unicast: Process timeouts equal to current time.
  * snmp4lptp: added snmp4lptp.8
  * Add possibility to set clockIdentity
  * Introduce the maxStepsRemoved attribute
  * config: Add hardware time stamp filter setting mode
  * snmp4lptp: Added function for data collection from ptp4l program.
  * snmp4lptp: Added communication to ptp4l via the UDS port.
  * snmp4lptp: Add snmp sub agent for linuxptp
- re-introduce the _service file
- removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by
  firewalld, see [1].
  [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html
- Update to stable release 2.0:
  * Peer-to-Peer Transparent Clock support
  * End-to-End Transparent Clock support
  * Unicast support
  * Support for all three Telecom Profiles
    + T-REC-G.8265.1-201407
    + T-REC-G.8275.1-201606
    + T-REC-G.8275.2-201708
- Changes for version 1.9.2:
  * Fixed stack buffer overflow in the new NetSync Monitor code (since 1.9)
  * Command line support for every configuration variable via long options
  * IPoIB interface support
  * Improved Delay Request performance at high message rates
  * Improved UTC offset tracking
  * Multiple TLV support
  * NetSync Monitor protocol support
  * Peer to peer one-step
  * Support for bonded interfaces
- No longer use _service
Update to version 1.9+git1.gd14f11f:
  * Expand and rationalize time stamping options.
  * Introduce peer to peer one step.
  * pmc: add long options and configuration file
  * port: Implement the NetSync Monitor protocol.
  * Introduce an option to ignore the transport specific field.
  * clock: add option to specify initial path delay.
  * sk: turn warnings about unexpected RX filter into debug messages.
- change the versioning scheme, resulting in version
  1.8+git65.g303b08c 
- Update to version v1.8+git.20180101 (bsc#1050682):
  * clock: Don't forward management requests to UDS port.
  * Add an acknowledgment in the readme for Meinberg.
  * phc2sys: update '-s' option
  * sk: don't leak socket when reading of IB GUID fails.
  * Add compile time sanity check for interface name lengths.
  * phc_ctl: fix adj command to accept negative offset.
  * port: return timestamping iface in port properties
  * phc2sys: re-create clock clkid and servo when phc index changed
  * phc2sys: split servo_add from function clock_add
  * transport: pass struct interface to transport_open
- Replace references to /var/adm/fillup-templates with new 
  %_fillupdir macro (boo#1069468)
- Remove future goals from description.
- Cleanup spec file with spec-cleaner
- Use url for source
- Use kernel-devel instead full source
- upgraded to 1.8
- new tools: timemaster, phc_ctl
- sanitize release line in specfile
- updated How To to mention ethtool (bnc#865358)
- convert to systemd (bnc#865355)
  - two separate services (ptp4l and phc2sys) instead of linuxptp
  - two separate config files:
    /etc/syscconfig/ptp4l and /etc/sysconfig/phc2sys instead of
    /etc/sysconfig/linuxptp
- upgraded to 1.4
- fixed FSF address in init file
- added Linux PTP Howto
- adjusted sysconfig defaults to match changes made to phc2sys
  behavior
- upgraded to 1.2.git74e70372
- upgraded to 1.2
- reviewed by Security (bnc#809336)
- license update: GPL-2.0+
  No indication of a GPL version 2 only license. Also, use SPDX format
  where possible
- upgraded to 1.1
- initial packaging

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by
  firewalld, see [1].
  [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Update to stable release 2.0:
  * Peer-to-Peer Transparent Clock support
  * End-to-End Transparent Clock support
  * Unicast support
  * Support for all three Telecom Profiles
    + T-REC-G.8265.1-201407
    + T-REC-G.8275.1-201606
    + T-REC-G.8275.2-201708
- Changes for version 1.9.2:
  * Fixed stack buffer overflow in the new NetSync Monitor code (since 1.9)
  * Command line support for every configuration variable via long options
  * IPoIB interface support
  * Improved Delay Request performance at high message rates
  * Improved UTC offset tracking
  * Multiple TLV support
  * NetSync Monitor protocol support
  * Peer to peer one-step
  * Support for bonded interfaces
- No longer use _service

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

• Files Changed
• Browse Source

- change the versioning scheme, resulting in version
  1.8+git65.g303b08c 

- Update to version 1.8+git65.g303b08c:
  * clock: Don't forward management requests to UDS port.
  * Add an acknowledgment in the readme for Meinberg.
  * phc2sys: update '-s' option
  * sk: don't leak socket when reading of IB GUID fails.
  * Add compile time sanity check for interface name lengths.
  * phc_ctl: fix adj command to accept negative offset.
  * port: return timestamping iface in port properties
  * phc2sys: re-create clock clkid and servo when phc index changed
  * phc2sys: split servo_add from function clock_add
  * transport: pass struct interface to transport_open

• Files Changed
• Browse Source

• Files Changed
• Browse Source

- Update to version v1.8+git.20180101 (bsc#1050682):
  * clock: Don't forward management requests to UDS port.
  * Add an acknowledgment in the readme for Meinberg.
  * phc2sys: update '-s' option
  * sk: don't leak socket when reading of IB GUID fails.
  * Add compile time sanity check for interface name lengths.
  * phc_ctl: fix adj command to accept negative offset.
  * port: return timestamping iface in port properties
  * phc2sys: re-create clock clkid and servo when phc index changed
  * phc2sys: split servo_add from function clock_add
  * transport: pass struct interface to transport_open

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468)

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Remove future goals from description.

• Files Changed
• Browse Source