Revisions of openssl-ibmca
buildservice-autocommit
accepted
request 1168604
from
Nikolay Gueorguiev (ngueorguiev)
(revision 70)
baserev update by copy to link target
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1168603
from
Nikolay Gueorguiev (ngueorguiev)
(revision 69)
- Amended the .spec file - Changed the package names +-------------+---------------------------------+--------------------------+ | Flavor | Package name | Note | +-------------+---------------------------------+--------------------------+ | '' | openssl-ibmca | Both engine and provider | | openssl1_1 | openssl1_1-ibmca | openssl1 flavor | | engine | openssl-ibmca-engine | Only engine | | provider | openssl-ibmca-provider | Only provider | +-------------+---------------------------------+--------------------------+
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1168592
from
Nikolay Gueorguiev (ngueorguiev)
(revision 68)
- Amended the .spec file - Changed the package names +-------------+---------------------------------+--------------------------+ | Flavor | Package name | Note | +-------------+---------------------------------+--------------------------+ | '' | openssl-ibmca | Both engine and provider | | openssl1_1 | openssl1_1-ibmca | openssl1 flavor | | engine | openssl-ibmca-engine | Only engine | | provider | openssl-ibmca-provider | Only provider | +-------------+---------------------------------+--------------------------+ - Applied a patch for openssl1_1 (bsc#1221627) * openssl1-rename-libica-files.patch - Re-implemented flavors (openssl3, engine, provider) (bsc#1221627) +------------+---------------------------------+--------------------------+ | Flavor | Package name | Note | +------------+---------------------------------+--------------------------+ | '' | openssl-ibmca | openssl1 flavor | | engine | openssl3-ibmca-engine | Only engine | | provider | openssl3-ibmca-provider | Only provider | | openssl3 | openssl3-ibmca | Both engine and provider | +------------+---------------------------------+--------------------------+ - Changing/editing 'dynamic_path' after the installation on the target system * From /usr/lib64/ossl-modules to /usr/lib64/engines-3 in /usr/share/doc/packages/openssl3-ibmca/ibmca-engine-opensslconfig for openssl3 flavor - Amended the .spec file (bsc#1221627) * Removed the flavors * Removed 'muiltibuild' environment * Removed the 'provider' logic - Updated the .spec file (bsc#1218933, bsc#1221627) * Amended the .spec file to use modulesdir variable - Implemented _multibuild environment (openssl1, engine, provider) - Added a flag and logic for provider in the .spec file * When provider is set to 1, it 'configures' the provider * When provider is set to 0, it 'configures' the engine - Removed an obsolete patch (implemented in the version 2.4.1) * openssl-ibmca-engine-noregister.patch - Upgrade to version 2.4.1 (jsc#PED-5422) * Provider: Change the default log directory to /tmp * Bug fixes - Updated the .spec file, amended to use libica4 instead of libica * Requires: libica4 >= 4 - Updated the .spec file * uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries - Updated the .spec file as follow: * BuildRequires: libica-devel >= 4.0.0 * BuildRequires: libica-tools >= 4.0.0 - Added dependency on libica4 (bsc#1209038) * BuildRequires and Requires statements in .spec file for libica4 - Applies a patch (bsc#1210359) * openssl-ibmca-engine-noregister.patch - Updated the '#dynamic_path' line, as it was before, with the comment '#'. - Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059) * openssl-ibmca 2.4.0 - Provider: Adjustments for OpenSSL versions 3.1 and 3.2 - Provider: Support RSA blinding - Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding - Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding - Provider: Adjustments in OpenSSL config generator and example configs - Engine: EC: Cache ICA key in EC_KEY object (performance improvement) - Engine: Enable RSA blinding - Updated .spec file removed '#' from the line containing 'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038) - Added in %files * /usr/lib64/engines-3/ibmca-provider.la * /usr/lib64/engines-3/ibmca-provider.so - Upgraded to version 2.3.1 (jsc#PED-597) * openssl-ibmca 2.3.1 - Adjustments for libica 4.1.0 * openssl-ibmca 2.3.0 - First version including the provider - Fix for engine build without OpenSSL 3.0 sources * openssl-ibmca 2.2.3 - Fix PKEY segfault with OpenSSL 3.0 * openssl-ibmca 2.2.2 - Fix tests with OpenSSL 3.0 - Build against libica 4.0 - Removed a Requires for libica from the specfile. - Removed the obsolete baselibs.conf file - Completely revamped the postinstall scriptlet so that it doesn't need to know or care about how many lines are in either /etc/ssl/openssl.cnf, or the sample file at /usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample We're now using the ".include" directive for the openssl.cnf file, and only modifying that file the minimum necessary to implement the change. (bsc#1004463) - Upgraded to version 2.2.1 (jsc#SLE-18333) * openssl-ibmca 2.2.1 Bug fixes * openssl-ibmca 2.2.0 Implement fallbacks based on OpenSSL Disable software fallbacks from libica Allow to specify default library (libica vs. libica-cex) to use Provide "libica" engine ctrl to switch library at load time Update README.md Remove libica link dependency Generate sample configuration files from system configuration Restructure registration global data * openssl-ibmca 2.1.3 Bug fix * openssl-ibmca 2.1.2 Bug fixes - Modified spec file to * Define a global variable enginesdir the same was as IBM does instead of _ENGINE_DIR as we had been doing. * Implemented %make_build macro according to spec-cleaner * Changed the package description to match IBM's. * Removed the redundant "autoreconf --force --install" - Upgrade to version 2.1.1 (jsc#SLE-13709) * Bug fixes - Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882) Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448 - Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424) * openssl-ibmca 2.0.3 Add MSA9 CPACF support for ECDSA sign/verify - Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch - Changed the ExclusiveArch directive to include s390x only. - The code in e_ibmca.c does a dlopen for libica.so.3, instead of linking against the shared library. As a result, if the package containing libica.so.3 isn't installed, problems occur. Added a "Requires: libica3" to the spec file to fix this. (bsc#1142286) - Made a couple of changes to the spec file based on the output from spec-cleaner. - Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch An Apache HTTP Server was set up with mod_ssl and the openssl ibmca engine using libica and a CEX6A card. Whenever a worker process is cleaned up a segmentation fault occurs. (bsc#1138517) - Upgraded to version 2.0.2 (Fate#325688) * openssl-ibmca 2.0.2 Fix doing rsa-me, altough rsa-crt would be possible. - Upgraded to version 2.0.1 (Fate#325688) * openssl-ibmca 2.0.1 Dont fail when a libica symbol cannot be resolved. - Made multiple changes to the spec file based on spec-cleaner output. - Upgraded to version 2.0.0 (Fate#325688) * openssl-ibmca 2.0.0 Add ECC support. Add check and distcheck make-targets. Project cleanup, code was broken into multiple files and coding style cleanup. Improvements to compat macros for openssl. Don't disable libica sw fallbacks. Fix dlclose logic. * openssl-ibmca 1.4.1 Fix structure size for aes-256-ecb/cbc/cfb/ofb Update man page Switch to ibmca.so filename to allow standalone use Switch off Libica fallback mode if available Make sure ibmca_init only runs once Provide simple macro for DEBUG_PRINTF possibility Cleanup and slight rework of function set_supported_meths - Did some cleanup to the spec file, based on spec-cleanup. - Removed the following obsolete patches: * openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch * openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch * openssl-ibmca-sles15-Update-lib-name-in-documentation.patch - Added the following patches for bsc#1097463 * openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch * openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch * openssl-ibmca-sles15-Update-lib-name-in-documentation.patch - Upgraded to version 1.4.0 * Re-license to Apache License v2.0 * Fix aes_gcm initialization. * Update man page. * Add macros for OpenSSL 0.9.8 compat. * Remove AC_FUNC_MALLOC from configure.ac * Add compat macro for OpenSSL 1.0.1e-fips. * Setting 'foreign' strictness for automake. * Add AES-GCM support. * Rework EVP_aes macros. * Remove dependency of old local OpenSSL headers. * Fix engine initialization to set function pointers only once. * Remove blank COPYING and NEWS files. * Remove INSTALL and move its content to README.md * Update README.md file to make use of markdown. * Rename README file to README.md to use markdown * Add CONTRIBUTING guidelines. * Adding coding style documentation. * Enable EVP_MD_FLAG_FIPS flag for SHA-*. * Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0 * Fix SHA512 EVP digest struct to use EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0 * Fix wrong parenthesis * convert libica loading to dlopen() and friends * Add support to DSO on new API of OpenSSL-1.1.0 - Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch - Added BuildRequires for autoconf, automake, and libtool. - Updated BuildRequires for libica-devel to be >= 3.1.1 - Now that the openSSL engines directory is versioned: * Modified the spec file to query the libcrypto package for which directory to install the engine into. * Removed openssl-ibmca-fix-enginepath.patch. Replaced it with a sed command so that it will provide the correct versioned engines directory - Removed openssl-ibmca-configure.patch. It doesn't seem to be needed any longer. - Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113) - Added libica-tools to the BuildRequires due to repackaging of libica. - Renamed BuildRequires from libica2-devel to libica-devel for the same reason. - Tweaked a comment to get rid of an rpmlint warning message. - fixed ssl configuration merging (bsc#1004463) - openssl-ibmca-fix-enginepath.patch: fix the engine path - Use macro for configure (fate#319941) - Use url for source - Enable parallel building - Cleanup spec file with spec-cleaner - Upgraded to version 1.3.0 (fate#319941) - Updated openssl-ibmca-configure.patch to apply cleanly - Removed obsolete patches - openssl-ibmca-README.patch - openssl-ibmca-sha256-digest-length.patch - openssl-pkey.patch - openssl-des-ede.patch - Did some spec file cleanup. - Fixed %post script to update library path (the only dynamic part of the ibmca configuration) every time the package is installed. (bsc#966139) - Updated AUTHORS, INSTALL, and README (bsc#942839) - %post and %postun added to properly update openssl.cnf (bsc#942839) - Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138) - Remove dependency on fillup anf insserv; the package provides neither sysconfig file nor sysvinit script - Remove depreciated AUTHORS section - Use %configure macro - Add openssl-ibmca-configure.patch - the openssl engines moved to /%_lib/engines bnc#905480 - Forced requirement of libica-2_3_0 (bnc#890824) - openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922) - openssl-pkey.patch: defer HMAC signing to pkey framework, fixes fips self-test during EC key creation (bnc#879922) - spec file cleaned up a bit - openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message digest length definition in sha256 template (bnc#868275) - update to 1.2.0 - removed patches: ibmca-configure.patch ibmca-segfault.fix.patch ibmca-sw-fix.patch openssl-ibmca-1.0.0.rc2-memset-fix.patch - make it exclusivearch for s390/s390x as the required libica is only available for s390/s390x - Made required libica-2_1_0 s390 specific - Added x86_64 to ExclusiveArch as %ix86 doesn't do it - Removed libica requirement - allowing build process to find it - Added COPYING to %files - Requiring libica 2.1.0 or greater - enable ppc64le - fix build (add autoconf automake libtool to BuildRequires) - disable libtool --finish call - own engines directory - package baselibs.conf - obsolete old -XXbit packages (bnc#437293) - added baselibs.conf file to build xxbit packages for multilib support - added fixes by IBM (bug #243801): ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM object ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM object openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem - updated README (bug #185508) - Fixed configure.in to build correctly - Fixed spec file - Initial version from Mike Halcrow
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1168552
from
Nikolay Gueorguiev (ngueorguiev)
(revision 67)
- Amended the .spec file - Changed the package names +------------+---------------------------------+--------------------------+ | Flavor | Package name | Note | +------------+---------------------------------+--------------------------+ | '' | openssl1_1-ibmca | openssl1 flavor | | engine | openssl-ibmca-engine | Only engine | | provider | openssl-ibmca-provider | Only provider | | openssl3 | openssl-ibmca | Both engine and provider | +------------+---------------------------------+--------------------------+ - Applied a patch for openssl1_1 (bsc#1221627) * openssl1-rename-libica-files.patch
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1168543
from
Nikolay Gueorguiev (ngueorguiev)
(revision 66)
- Amended the .spec file - Changed the package names +------------+---------------------------------+--------------------------+ | Flavor | Package name | Note | +------------+---------------------------------+--------------------------+ | '' | openssl1_1-ibmca | openssl1 flavor | | engine | openssl-ibmca-engine | Only engine | | provider | openssl-ibmca-provider | Only provider | | openssl3 | openssl-ibmca | Both engine and provider | +------------+---------------------------------+--------------------------+ - Applied a patch for openssl1_1 (bsc#1221627) * openssl1-rename-libica-files.patch
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1166593
from
Nikolay Gueorguiev (ngueorguiev)
(revision 65)
Re-implemented flavors (openssl3, engine, provider)
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1166481
from
Nikolay Gueorguiev (ngueorguiev)
(revision 64)
- Re-implemented flavors (openssl3, engine, provider) (bsc#1221627) +------------+---------------------------------+--------------------------+ | Flavor | Package name | Note | +------------+---------------------------------+--------------------------+ | '' | openssl-ibmca | openssl1 flavor | | engine | openssl3-ibmca-engine | Only engine | | provider | openssl3-ibmca-provider | Only provider | | openssl3 | openssl3-ibmca | Both engine and provider | +------------+---------------------------------+--------------------------+ - Changing/editing 'dynamic_path' after the installation on the target system * From /usr/lib64/ossl-modules to /usr/lib64/engines-3 in /usr/share/doc/packages/openssl3-ibmca/ibmca-engine-opensslconfig for openssl3 flavor - Amended the .spec file (bsc#1221627) * Removed the flavors * Removed 'muiltibuild' environment * Removed the 'provider' logic - Updated the .spec file (bsc#1218933, bsc#1221627) * Amended the .spec file to use modulesdir variable - Implemented _multibuild environment (openssl1, engine, provider) - Added a flag and logic for provider in the .spec file * When provider is set to 1, it 'configures' the provider * When provider is set to 0, it 'configures' the engine - Removed an obsolete patch (implemented in the version 2.4.1) * openssl-ibmca-engine-noregister.patch - Upgrade to version 2.4.1 (jsc#PED-5422) * Provider: Change the default log directory to /tmp * Bug fixes - Updated the .spec file, amended to use libica4 instead of libica * Requires: libica4 >= 4 - Updated the .spec file * uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries - Updated the .spec file as follow: * BuildRequires: libica-devel >= 4.0.0 * BuildRequires: libica-tools >= 4.0.0 - Added dependency on libica4 (bsc#1209038) * BuildRequires and Requires statements in .spec file for libica4 - Applies a patch (bsc#1210359) * openssl-ibmca-engine-noregister.patch - Updated the '#dynamic_path' line, as it was before, with the comment '#'. - Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059) * openssl-ibmca 2.4.0 - Provider: Adjustments for OpenSSL versions 3.1 and 3.2 - Provider: Support RSA blinding - Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding - Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding - Provider: Adjustments in OpenSSL config generator and example configs - Engine: EC: Cache ICA key in EC_KEY object (performance improvement) - Engine: Enable RSA blinding - Updated .spec file removed '#' from the line containing 'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038) - Added in %files * /usr/lib64/engines-3/ibmca-provider.la * /usr/lib64/engines-3/ibmca-provider.so - Upgraded to version 2.3.1 (jsc#PED-597) * openssl-ibmca 2.3.1 - Adjustments for libica 4.1.0 * openssl-ibmca 2.3.0 - First version including the provider - Fix for engine build without OpenSSL 3.0 sources * openssl-ibmca 2.2.3 - Fix PKEY segfault with OpenSSL 3.0 * openssl-ibmca 2.2.2 - Fix tests with OpenSSL 3.0 - Build against libica 4.0 - Removed a Requires for libica from the specfile. - Removed the obsolete baselibs.conf file - Completely revamped the postinstall scriptlet so that it doesn't need to know or care about how many lines are in either /etc/ssl/openssl.cnf, or the sample file at /usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample We're now using the ".include" directive for the openssl.cnf file, and only modifying that file the minimum necessary to implement the change. (bsc#1004463) - Upgraded to version 2.2.1 (jsc#SLE-18333) * openssl-ibmca 2.2.1 Bug fixes * openssl-ibmca 2.2.0 Implement fallbacks based on OpenSSL Disable software fallbacks from libica Allow to specify default library (libica vs. libica-cex) to use Provide "libica" engine ctrl to switch library at load time Update README.md Remove libica link dependency Generate sample configuration files from system configuration Restructure registration global data * openssl-ibmca 2.1.3 Bug fix * openssl-ibmca 2.1.2 Bug fixes - Modified spec file to * Define a global variable enginesdir the same was as IBM does instead of _ENGINE_DIR as we had been doing. * Implemented %make_build macro according to spec-cleaner * Changed the package description to match IBM's. * Removed the redundant "autoreconf --force --install" - Upgrade to version 2.1.1 (jsc#SLE-13709) * Bug fixes - Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882) Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448 - Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424) * openssl-ibmca 2.0.3 Add MSA9 CPACF support for ECDSA sign/verify - Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch - Changed the ExclusiveArch directive to include s390x only. - The code in e_ibmca.c does a dlopen for libica.so.3, instead of linking against the shared library. As a result, if the package containing libica.so.3 isn't installed, problems occur. Added a "Requires: libica3" to the spec file to fix this. (bsc#1142286) - Made a couple of changes to the spec file based on the output from spec-cleaner. - Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch An Apache HTTP Server was set up with mod_ssl and the openssl ibmca engine using libica and a CEX6A card. Whenever a worker process is cleaned up a segmentation fault occurs. (bsc#1138517) - Upgraded to version 2.0.2 (Fate#325688) * openssl-ibmca 2.0.2 Fix doing rsa-me, altough rsa-crt would be possible. - Upgraded to version 2.0.1 (Fate#325688) * openssl-ibmca 2.0.1 Dont fail when a libica symbol cannot be resolved. - Made multiple changes to the spec file based on spec-cleaner output. - Upgraded to version 2.0.0 (Fate#325688) * openssl-ibmca 2.0.0 Add ECC support. Add check and distcheck make-targets. Project cleanup, code was broken into multiple files and coding style cleanup. Improvements to compat macros for openssl. Don't disable libica sw fallbacks. Fix dlclose logic. * openssl-ibmca 1.4.1 Fix structure size for aes-256-ecb/cbc/cfb/ofb Update man page Switch to ibmca.so filename to allow standalone use Switch off Libica fallback mode if available Make sure ibmca_init only runs once Provide simple macro for DEBUG_PRINTF possibility Cleanup and slight rework of function set_supported_meths - Did some cleanup to the spec file, based on spec-cleanup. - Removed the following obsolete patches: * openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch * openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch * openssl-ibmca-sles15-Update-lib-name-in-documentation.patch - Added the following patches for bsc#1097463 * openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch * openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch * openssl-ibmca-sles15-Update-lib-name-in-documentation.patch - Upgraded to version 1.4.0 * Re-license to Apache License v2.0 * Fix aes_gcm initialization. * Update man page. * Add macros for OpenSSL 0.9.8 compat. * Remove AC_FUNC_MALLOC from configure.ac * Add compat macro for OpenSSL 1.0.1e-fips. * Setting 'foreign' strictness for automake. * Add AES-GCM support. * Rework EVP_aes macros. * Remove dependency of old local OpenSSL headers. * Fix engine initialization to set function pointers only once. * Remove blank COPYING and NEWS files. * Remove INSTALL and move its content to README.md * Update README.md file to make use of markdown. * Rename README file to README.md to use markdown * Add CONTRIBUTING guidelines. * Adding coding style documentation. * Enable EVP_MD_FLAG_FIPS flag for SHA-*. * Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0 * Fix SHA512 EVP digest struct to use EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0 * Fix wrong parenthesis * convert libica loading to dlopen() and friends * Add support to DSO on new API of OpenSSL-1.1.0 - Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch - Added BuildRequires for autoconf, automake, and libtool. - Updated BuildRequires for libica-devel to be >= 3.1.1 - Now that the openSSL engines directory is versioned: * Modified the spec file to query the libcrypto package for which directory to install the engine into. * Removed openssl-ibmca-fix-enginepath.patch. Replaced it with a sed command so that it will provide the correct versioned engines directory - Removed openssl-ibmca-configure.patch. It doesn't seem to be needed any longer. - Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113) - Added libica-tools to the BuildRequires due to repackaging of libica. - Renamed BuildRequires from libica2-devel to libica-devel for the same reason. - Tweaked a comment to get rid of an rpmlint warning message. - fixed ssl configuration merging (bsc#1004463) - openssl-ibmca-fix-enginepath.patch: fix the engine path - Use macro for configure (fate#319941) - Use url for source - Enable parallel building - Cleanup spec file with spec-cleaner - Upgraded to version 1.3.0 (fate#319941) - Updated openssl-ibmca-configure.patch to apply cleanly - Removed obsolete patches - openssl-ibmca-README.patch - openssl-ibmca-sha256-digest-length.patch - openssl-pkey.patch - openssl-des-ede.patch - Did some spec file cleanup. - Fixed %post script to update library path (the only dynamic part of the ibmca configuration) every time the package is installed. (bsc#966139) - Updated AUTHORS, INSTALL, and README (bsc#942839) - %post and %postun added to properly update openssl.cnf (bsc#942839) - Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138) - Remove dependency on fillup anf insserv; the package provides neither sysconfig file nor sysvinit script - Remove depreciated AUTHORS section - Use %configure macro - Add openssl-ibmca-configure.patch - the openssl engines moved to /%_lib/engines bnc#905480 - Forced requirement of libica-2_3_0 (bnc#890824) - openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922) - openssl-pkey.patch: defer HMAC signing to pkey framework, fixes fips self-test during EC key creation (bnc#879922) - spec file cleaned up a bit - openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message digest length definition in sha256 template (bnc#868275) - update to 1.2.0 - removed patches: ibmca-configure.patch ibmca-segfault.fix.patch ibmca-sw-fix.patch openssl-ibmca-1.0.0.rc2-memset-fix.patch - make it exclusivearch for s390/s390x as the required libica is only available for s390/s390x - Made required libica-2_1_0 s390 specific - Added x86_64 to ExclusiveArch as %ix86 doesn't do it - Removed libica requirement - allowing build process to find it - Added COPYING to %files - Requiring libica 2.1.0 or greater - enable ppc64le - fix build (add autoconf automake libtool to BuildRequires) - disable libtool --finish call - own engines directory - package baselibs.conf - obsolete old -XXbit packages (bnc#437293) - added baselibs.conf file to build xxbit packages for multilib support - added fixes by IBM (bug #243801): ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM object ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM object openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem - updated README (bug #185508) - Fixed configure.in to build correctly - Fixed spec file - Initial version from Mike Halcrow
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1165422
from
Nikolay Gueorguiev (ngueorguiev)
(revision 63)
- Changing/editing 'dynamic_path' after the installation on the target system * From /usr/lib64/ossl-modules to /usr/lib64/engines-3 in /usr/share/doc/packages/openssl-ibmca/ibmca-engine-opensslconfig - Amended the .spec file (bsc#1221627) * Removed the flavors * Removed 'muiltibuild' environment * Removed the 'provider' logic - Updated the .spec file (bsc#1218933, bsc#1221627) * Amended the .spec file to use modulesdir variable - Implemented _multibuild environment (openssl1, engine, provider) - Added a flag and logic for provider in the .spec file * When provider is set to 1, it 'configures' the provider * When provider is set to 0, it 'configures' the engine - Removed an obsolete patch (implemented in the version 2.4.1) * openssl-ibmca-engine-noregister.patch - Upgrade to version 2.4.1 (jsc#PED-5422) * Provider: Change the default log directory to /tmp * Bug fixes - Updated the .spec file, amended to use libica4 instead of libica * Requires: libica4 >= 4 - Updated the .spec file * uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries - Updated the .spec file as follow: * BuildRequires: libica-devel >= 4.0.0 * BuildRequires: libica-tools >= 4.0.0 - Added dependency on libica4 (bsc#1209038) * BuildRequires and Requires statements in .spec file for libica4 - Applies a patch (bsc#1210359) * openssl-ibmca-engine-noregister.patch - Updated the '#dynamic_path' line, as it was before, with the comment '#'. - Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059) * openssl-ibmca 2.4.0 - Provider: Adjustments for OpenSSL versions 3.1 and 3.2 - Provider: Support RSA blinding - Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding - Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding - Provider: Adjustments in OpenSSL config generator and example configs - Engine: EC: Cache ICA key in EC_KEY object (performance improvement) - Engine: Enable RSA blinding - Updated .spec file removed '#' from the line containing 'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038) - Added in %files * /usr/lib64/engines-3/ibmca-provider.la * /usr/lib64/engines-3/ibmca-provider.so - Upgraded to version 2.3.1 (jsc#PED-597) * openssl-ibmca 2.3.1 - Adjustments for libica 4.1.0 * openssl-ibmca 2.3.0 - First version including the provider - Fix for engine build without OpenSSL 3.0 sources * openssl-ibmca 2.2.3 - Fix PKEY segfault with OpenSSL 3.0 * openssl-ibmca 2.2.2 - Fix tests with OpenSSL 3.0 - Build against libica 4.0 - Removed a Requires for libica from the specfile. - Removed the obsolete baselibs.conf file - Completely revamped the postinstall scriptlet so that it doesn't need to know or care about how many lines are in either /etc/ssl/openssl.cnf, or the sample file at /usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample We're now using the ".include" directive for the openssl.cnf file, and only modifying that file the minimum necessary to implement the change. (bsc#1004463) - Upgraded to version 2.2.1 (jsc#SLE-18333) * openssl-ibmca 2.2.1 Bug fixes * openssl-ibmca 2.2.0 Implement fallbacks based on OpenSSL Disable software fallbacks from libica Allow to specify default library (libica vs. libica-cex) to use Provide "libica" engine ctrl to switch library at load time Update README.md Remove libica link dependency Generate sample configuration files from system configuration Restructure registration global data * openssl-ibmca 2.1.3 Bug fix * openssl-ibmca 2.1.2 Bug fixes - Modified spec file to * Define a global variable enginesdir the same was as IBM does instead of _ENGINE_DIR as we had been doing. * Implemented %make_build macro according to spec-cleaner * Changed the package description to match IBM's. * Removed the redundant "autoreconf --force --install" - Upgrade to version 2.1.1 (jsc#SLE-13709) * Bug fixes - Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882) Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448 - Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424) * openssl-ibmca 2.0.3 Add MSA9 CPACF support for ECDSA sign/verify - Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch - Changed the ExclusiveArch directive to include s390x only. - The code in e_ibmca.c does a dlopen for libica.so.3, instead of linking against the shared library. As a result, if the package containing libica.so.3 isn't installed, problems occur. Added a "Requires: libica3" to the spec file to fix this. (bsc#1142286) - Made a couple of changes to the spec file based on the output from spec-cleaner. - Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch An Apache HTTP Server was set up with mod_ssl and the openssl ibmca engine using libica and a CEX6A card. Whenever a worker process is cleaned up a segmentation fault occurs. (bsc#1138517) - Upgraded to version 2.0.2 (Fate#325688) * openssl-ibmca 2.0.2 Fix doing rsa-me, altough rsa-crt would be possible. - Upgraded to version 2.0.1 (Fate#325688) * openssl-ibmca 2.0.1 Dont fail when a libica symbol cannot be resolved. - Made multiple changes to the spec file based on spec-cleaner output. - Upgraded to version 2.0.0 (Fate#325688) * openssl-ibmca 2.0.0 Add ECC support. Add check and distcheck make-targets. Project cleanup, code was broken into multiple files and coding style cleanup. Improvements to compat macros for openssl. Don't disable libica sw fallbacks. Fix dlclose logic. * openssl-ibmca 1.4.1 Fix structure size for aes-256-ecb/cbc/cfb/ofb Update man page Switch to ibmca.so filename to allow standalone use Switch off Libica fallback mode if available Make sure ibmca_init only runs once Provide simple macro for DEBUG_PRINTF possibility Cleanup and slight rework of function set_supported_meths - Did some cleanup to the spec file, based on spec-cleanup. - Removed the following obsolete patches: * openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch * openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch * openssl-ibmca-sles15-Update-lib-name-in-documentation.patch - Added the following patches for bsc#1097463 * openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch * openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch * openssl-ibmca-sles15-Update-lib-name-in-documentation.patch - Upgraded to version 1.4.0 * Re-license to Apache License v2.0 * Fix aes_gcm initialization. * Update man page. * Add macros for OpenSSL 0.9.8 compat. * Remove AC_FUNC_MALLOC from configure.ac * Add compat macro for OpenSSL 1.0.1e-fips. * Setting 'foreign' strictness for automake. * Add AES-GCM support. * Rework EVP_aes macros. * Remove dependency of old local OpenSSL headers. * Fix engine initialization to set function pointers only once. * Remove blank COPYING and NEWS files. * Remove INSTALL and move its content to README.md * Update README.md file to make use of markdown. * Rename README file to README.md to use markdown * Add CONTRIBUTING guidelines. * Adding coding style documentation. * Enable EVP_MD_FLAG_FIPS flag for SHA-*. * Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0 * Fix SHA512 EVP digest struct to use EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0 * Fix wrong parenthesis * convert libica loading to dlopen() and friends * Add support to DSO on new API of OpenSSL-1.1.0 - Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch - Added BuildRequires for autoconf, automake, and libtool. - Updated BuildRequires for libica-devel to be >= 3.1.1 - Now that the openSSL engines directory is versioned: * Modified the spec file to query the libcrypto package for which directory to install the engine into. * Removed openssl-ibmca-fix-enginepath.patch. Replaced it with a sed command so that it will provide the correct versioned engines directory - Removed openssl-ibmca-configure.patch. It doesn't seem to be needed any longer. - Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113) - Added libica-tools to the BuildRequires due to repackaging of libica. - Renamed BuildRequires from libica2-devel to libica-devel for the same reason. - Tweaked a comment to get rid of an rpmlint warning message. - fixed ssl configuration merging (bsc#1004463) - openssl-ibmca-fix-enginepath.patch: fix the engine path - Use macro for configure (fate#319941) - Use url for source - Enable parallel building - Cleanup spec file with spec-cleaner - Upgraded to version 1.3.0 (fate#319941) - Updated openssl-ibmca-configure.patch to apply cleanly - Removed obsolete patches - openssl-ibmca-README.patch - openssl-ibmca-sha256-digest-length.patch - openssl-pkey.patch - openssl-des-ede.patch - Did some spec file cleanup. - Fixed %post script to update library path (the only dynamic part of the ibmca configuration) every time the package is installed. (bsc#966139) - Updated AUTHORS, INSTALL, and README (bsc#942839) - %post and %postun added to properly update openssl.cnf (bsc#942839) - Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138) - Remove dependency on fillup anf insserv; the package provides neither sysconfig file nor sysvinit script - Remove depreciated AUTHORS section - Use %configure macro - Add openssl-ibmca-configure.patch - the openssl engines moved to /%_lib/engines bnc#905480 - Forced requirement of libica-2_3_0 (bnc#890824) - openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922) - openssl-pkey.patch: defer HMAC signing to pkey framework, fixes fips self-test during EC key creation (bnc#879922) - spec file cleaned up a bit - openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message digest length definition in sha256 template (bnc#868275) - update to 1.2.0 - removed patches: ibmca-configure.patch ibmca-segfault.fix.patch ibmca-sw-fix.patch openssl-ibmca-1.0.0.rc2-memset-fix.patch - make it exclusivearch for s390/s390x as the required libica is only available for s390/s390x - Made required libica-2_1_0 s390 specific - Added x86_64 to ExclusiveArch as %ix86 doesn't do it - Removed libica requirement - allowing build process to find it - Added COPYING to %files - Requiring libica 2.1.0 or greater - enable ppc64le - fix build (add autoconf automake libtool to BuildRequires) - disable libtool --finish call - own engines directory - package baselibs.conf - obsolete old -XXbit packages (bnc#437293) - added baselibs.conf file to build xxbit packages for multilib support - added fixes by IBM (bug #243801): ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM object ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM object openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem - updated README (bug #185508) - Fixed configure.in to build correctly - Fixed spec file - Initial version from Mike Halcrow
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1164961
from
Nikolay Gueorguiev (ngueorguiev)
(revision 62)
- Amended the .spec file (bsc#1221627) * Removed the flavors * Removed 'muiltibuild' environment * Removed the 'provider' logic - Updated the .spec file (bsc#1218933, bsc#1221627) * Amended the .spec file to use modulesdir variable - Implemented _multibuild environment (openssl1, engine, provider) - Added a flag and logic for provider in the .spec file * When provider is set to 1, it 'configures' the provider * When provider is set to 0, it 'configures' the engine - Removed an obsolete patch (implemented in the version 2.4.1) * openssl-ibmca-engine-noregister.patch - Upgrade to version 2.4.1 (jsc#PED-5422) * Provider: Change the default log directory to /tmp * Bug fixes - Updated the .spec file, amended to use libica4 instead of libica * Requires: libica4 >= 4 - Updated the .spec file * uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries - Updated the .spec file as follow: * BuildRequires: libica-devel >= 4.0.0 * BuildRequires: libica-tools >= 4.0.0 - Added dependency on libica4 (bsc#1209038) * BuildRequires and Requires statements in .spec file for libica4 - Applies a patch (bsc#1210359) * openssl-ibmca-engine-noregister.patch - Updated the '#dynamic_path' line, as it was before, with the comment '#'. - Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059) * openssl-ibmca 2.4.0 - Provider: Adjustments for OpenSSL versions 3.1 and 3.2 - Provider: Support RSA blinding - Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding - Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding - Provider: Adjustments in OpenSSL config generator and example configs - Engine: EC: Cache ICA key in EC_KEY object (performance improvement) - Engine: Enable RSA blinding - Updated .spec file removed '#' from the line containing 'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038) - Added in %files * /usr/lib64/engines-3/ibmca-provider.la * /usr/lib64/engines-3/ibmca-provider.so - Upgraded to version 2.3.1 (jsc#PED-597) * openssl-ibmca 2.3.1 - Adjustments for libica 4.1.0 * openssl-ibmca 2.3.0 - First version including the provider - Fix for engine build without OpenSSL 3.0 sources * openssl-ibmca 2.2.3 - Fix PKEY segfault with OpenSSL 3.0 * openssl-ibmca 2.2.2 - Fix tests with OpenSSL 3.0 - Build against libica 4.0 - Removed a Requires for libica from the specfile. - Removed the obsolete baselibs.conf file - Completely revamped the postinstall scriptlet so that it doesn't need to know or care about how many lines are in either /etc/ssl/openssl.cnf, or the sample file at /usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample We're now using the ".include" directive for the openssl.cnf file, and only modifying that file the minimum necessary to implement the change. (bsc#1004463) - Upgraded to version 2.2.1 (jsc#SLE-18333) * openssl-ibmca 2.2.1 Bug fixes * openssl-ibmca 2.2.0 Implement fallbacks based on OpenSSL Disable software fallbacks from libica Allow to specify default library (libica vs. libica-cex) to use Provide "libica" engine ctrl to switch library at load time Update README.md Remove libica link dependency Generate sample configuration files from system configuration Restructure registration global data * openssl-ibmca 2.1.3 Bug fix * openssl-ibmca 2.1.2 Bug fixes - Modified spec file to * Define a global variable enginesdir the same was as IBM does instead of _ENGINE_DIR as we had been doing. * Implemented %make_build macro according to spec-cleaner * Changed the package description to match IBM's. * Removed the redundant "autoreconf --force --install" - Upgrade to version 2.1.1 (jsc#SLE-13709) * Bug fixes - Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882) Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448 - Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424) * openssl-ibmca 2.0.3 Add MSA9 CPACF support for ECDSA sign/verify - Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch - Changed the ExclusiveArch directive to include s390x only. - The code in e_ibmca.c does a dlopen for libica.so.3, instead of linking against the shared library. As a result, if the package containing libica.so.3 isn't installed, problems occur. Added a "Requires: libica3" to the spec file to fix this. (bsc#1142286) - Made a couple of changes to the spec file based on the output from spec-cleaner. - Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch An Apache HTTP Server was set up with mod_ssl and the openssl ibmca engine using libica and a CEX6A card. Whenever a worker process is cleaned up a segmentation fault occurs. (bsc#1138517) - Upgraded to version 2.0.2 (Fate#325688) * openssl-ibmca 2.0.2 Fix doing rsa-me, altough rsa-crt would be possible. - Upgraded to version 2.0.1 (Fate#325688) * openssl-ibmca 2.0.1 Dont fail when a libica symbol cannot be resolved. - Made multiple changes to the spec file based on spec-cleaner output. - Upgraded to version 2.0.0 (Fate#325688) * openssl-ibmca 2.0.0 Add ECC support. Add check and distcheck make-targets. Project cleanup, code was broken into multiple files and coding style cleanup. Improvements to compat macros for openssl. Don't disable libica sw fallbacks. Fix dlclose logic. * openssl-ibmca 1.4.1 Fix structure size for aes-256-ecb/cbc/cfb/ofb Update man page Switch to ibmca.so filename to allow standalone use Switch off Libica fallback mode if available Make sure ibmca_init only runs once Provide simple macro for DEBUG_PRINTF possibility Cleanup and slight rework of function set_supported_meths - Did some cleanup to the spec file, based on spec-cleanup. - Removed the following obsolete patches: * openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch * openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch * openssl-ibmca-sles15-Update-lib-name-in-documentation.patch - Added the following patches for bsc#1097463 * openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch * openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch * openssl-ibmca-sles15-Update-lib-name-in-documentation.patch - Upgraded to version 1.4.0 * Re-license to Apache License v2.0 * Fix aes_gcm initialization. * Update man page. * Add macros for OpenSSL 0.9.8 compat. * Remove AC_FUNC_MALLOC from configure.ac * Add compat macro for OpenSSL 1.0.1e-fips. * Setting 'foreign' strictness for automake. * Add AES-GCM support. * Rework EVP_aes macros. * Remove dependency of old local OpenSSL headers. * Fix engine initialization to set function pointers only once. * Remove blank COPYING and NEWS files. * Remove INSTALL and move its content to README.md * Update README.md file to make use of markdown. * Rename README file to README.md to use markdown * Add CONTRIBUTING guidelines. * Adding coding style documentation. * Enable EVP_MD_FLAG_FIPS flag for SHA-*. * Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0 * Fix SHA512 EVP digest struct to use EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0 * Fix wrong parenthesis * convert libica loading to dlopen() and friends * Add support to DSO on new API of OpenSSL-1.1.0 - Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch - Added BuildRequires for autoconf, automake, and libtool. - Updated BuildRequires for libica-devel to be >= 3.1.1 - Now that the openSSL engines directory is versioned: * Modified the spec file to query the libcrypto package for which directory to install the engine into. * Removed openssl-ibmca-fix-enginepath.patch. Replaced it with a sed command so that it will provide the correct versioned engines directory - Removed openssl-ibmca-configure.patch. It doesn't seem to be needed any longer. - Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113) - Added libica-tools to the BuildRequires due to repackaging of libica. - Renamed BuildRequires from libica2-devel to libica-devel for the same reason. - Tweaked a comment to get rid of an rpmlint warning message. - fixed ssl configuration merging (bsc#1004463) - openssl-ibmca-fix-enginepath.patch: fix the engine path - Use macro for configure (fate#319941) - Use url for source - Enable parallel building - Cleanup spec file with spec-cleaner - Upgraded to version 1.3.0 (fate#319941) - Updated openssl-ibmca-configure.patch to apply cleanly - Removed obsolete patches - openssl-ibmca-README.patch - openssl-ibmca-sha256-digest-length.patch - openssl-pkey.patch - openssl-des-ede.patch - Did some spec file cleanup. - Fixed %post script to update library path (the only dynamic part of the ibmca configuration) every time the package is installed. (bsc#966139) - Updated AUTHORS, INSTALL, and README (bsc#942839) - %post and %postun added to properly update openssl.cnf (bsc#942839) - Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138) - Remove dependency on fillup anf insserv; the package provides neither sysconfig file nor sysvinit script - Remove depreciated AUTHORS section - Use %configure macro - Add openssl-ibmca-configure.patch - the openssl engines moved to /%_lib/engines bnc#905480 - Forced requirement of libica-2_3_0 (bnc#890824) - openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922) - openssl-pkey.patch: defer HMAC signing to pkey framework, fixes fips self-test during EC key creation (bnc#879922) - spec file cleaned up a bit - openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message digest length definition in sha256 template (bnc#868275) - update to 1.2.0 - removed patches: ibmca-configure.patch ibmca-segfault.fix.patch ibmca-sw-fix.patch openssl-ibmca-1.0.0.rc2-memset-fix.patch - make it exclusivearch for s390/s390x as the required libica is only available for s390/s390x - Made required libica-2_1_0 s390 specific - Added x86_64 to ExclusiveArch as %ix86 doesn't do it - Removed libica requirement - allowing build process to find it - Added COPYING to %files - Requiring libica 2.1.0 or greater - enable ppc64le - fix build (add autoconf automake libtool to BuildRequires) - disable libtool --finish call - own engines directory - package baselibs.conf - obsolete old -XXbit packages (bnc#437293) - added baselibs.conf file to build xxbit packages for multilib support - added fixes by IBM (bug #243801): ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM object ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM object openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem - updated README (bug #185508) - Fixed configure.in to build correctly - Fixed spec file - Initial version from Mike Halcrow
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1164500
from
Nikolay Gueorguiev (ngueorguiev)
(revision 61)
- Amended the .spec file (bsc#1221627) * Removed the flavors * Removed 'muiltibuild' environment * Removed the 'provider' logic - Updated the .spec file (bsc#1218933, bsc#1221627) * Amended the .spec file to use modulesdir variable - Implemented _multibuild environment (openssl1, engine, provider) - Added a flag and logic for provider in the .spec file * When provider is set to 1, it 'configures' the provider * When provider is set to 0, it 'configures' the engine - Removed an obsolete patch (implemented in the version 2.4.1) * openssl-ibmca-engine-noregister.patch - Upgrade to version 2.4.1 (jsc#PED-5422) * Provider: Change the default log directory to /tmp * Bug fixes - Updated the .spec file, amended to use libica4 instead of libica * Requires: libica4 >= 4 - Updated the .spec file * uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries - Updated the .spec file as follow: * BuildRequires: libica-devel >= 4.0.0 * BuildRequires: libica-tools >= 4.0.0 - Added dependency on libica4 (bsc#1209038) * BuildRequires and Requires statements in .spec file for libica4 - Applies a patch (bsc#1210359) * openssl-ibmca-engine-noregister.patch - Updated the '#dynamic_path' line, as it was before, with the comment '#'. - Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059) * openssl-ibmca 2.4.0 - Provider: Adjustments for OpenSSL versions 3.1 and 3.2 - Provider: Support RSA blinding - Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding - Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding - Provider: Adjustments in OpenSSL config generator and example configs - Engine: EC: Cache ICA key in EC_KEY object (performance improvement) - Engine: Enable RSA blinding - Updated .spec file removed '#' from the line containing 'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038) - Added in %files * /usr/lib64/engines-3/ibmca-provider.la * /usr/lib64/engines-3/ibmca-provider.so - Upgraded to version 2.3.1 (jsc#PED-597) * openssl-ibmca 2.3.1 - Adjustments for libica 4.1.0 * openssl-ibmca 2.3.0 - First version including the provider - Fix for engine build without OpenSSL 3.0 sources * openssl-ibmca 2.2.3 - Fix PKEY segfault with OpenSSL 3.0 * openssl-ibmca 2.2.2 - Fix tests with OpenSSL 3.0 - Build against libica 4.0 - Removed a Requires for libica from the specfile. - Removed the obsolete baselibs.conf file - Completely revamped the postinstall scriptlet so that it doesn't need to know or care about how many lines are in either /etc/ssl/openssl.cnf, or the sample file at /usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample We're now using the ".include" directive for the openssl.cnf file, and only modifying that file the minimum necessary to implement the change. (bsc#1004463) - Upgraded to version 2.2.1 (jsc#SLE-18333) * openssl-ibmca 2.2.1 Bug fixes * openssl-ibmca 2.2.0 Implement fallbacks based on OpenSSL Disable software fallbacks from libica Allow to specify default library (libica vs. libica-cex) to use Provide "libica" engine ctrl to switch library at load time Update README.md Remove libica link dependency Generate sample configuration files from system configuration Restructure registration global data * openssl-ibmca 2.1.3 Bug fix * openssl-ibmca 2.1.2 Bug fixes - Modified spec file to * Define a global variable enginesdir the same was as IBM does instead of _ENGINE_DIR as we had been doing. * Implemented %make_build macro according to spec-cleaner * Changed the package description to match IBM's. * Removed the redundant "autoreconf --force --install" - Upgrade to version 2.1.1 (jsc#SLE-13709) * Bug fixes - Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882) Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448 - Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424) * openssl-ibmca 2.0.3 Add MSA9 CPACF support for ECDSA sign/verify - Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch - Changed the ExclusiveArch directive to include s390x only. - The code in e_ibmca.c does a dlopen for libica.so.3, instead of linking against the shared library. As a result, if the package containing libica.so.3 isn't installed, problems occur. Added a "Requires: libica3" to the spec file to fix this. (bsc#1142286) - Made a couple of changes to the spec file based on the output from spec-cleaner. - Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch An Apache HTTP Server was set up with mod_ssl and the openssl ibmca engine using libica and a CEX6A card. Whenever a worker process is cleaned up a segmentation fault occurs. (bsc#1138517) - Upgraded to version 2.0.2 (Fate#325688) * openssl-ibmca 2.0.2 Fix doing rsa-me, altough rsa-crt would be possible. - Upgraded to version 2.0.1 (Fate#325688) * openssl-ibmca 2.0.1 Dont fail when a libica symbol cannot be resolved. - Made multiple changes to the spec file based on spec-cleaner output. - Upgraded to version 2.0.0 (Fate#325688) * openssl-ibmca 2.0.0 Add ECC support. Add check and distcheck make-targets. Project cleanup, code was broken into multiple files and coding style cleanup. Improvements to compat macros for openssl. Don't disable libica sw fallbacks. Fix dlclose logic. * openssl-ibmca 1.4.1 Fix structure size for aes-256-ecb/cbc/cfb/ofb Update man page Switch to ibmca.so filename to allow standalone use Switch off Libica fallback mode if available Make sure ibmca_init only runs once Provide simple macro for DEBUG_PRINTF possibility Cleanup and slight rework of function set_supported_meths - Did some cleanup to the spec file, based on spec-cleanup. - Removed the following obsolete patches: * openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch * openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch * openssl-ibmca-sles15-Update-lib-name-in-documentation.patch - Added the following patches for bsc#1097463 * openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch * openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch * openssl-ibmca-sles15-Update-lib-name-in-documentation.patch - Upgraded to version 1.4.0 * Re-license to Apache License v2.0 * Fix aes_gcm initialization. * Update man page. * Add macros for OpenSSL 0.9.8 compat. * Remove AC_FUNC_MALLOC from configure.ac * Add compat macro for OpenSSL 1.0.1e-fips. * Setting 'foreign' strictness for automake. * Add AES-GCM support. * Rework EVP_aes macros. * Remove dependency of old local OpenSSL headers. * Fix engine initialization to set function pointers only once. * Remove blank COPYING and NEWS files. * Remove INSTALL and move its content to README.md * Update README.md file to make use of markdown. * Rename README file to README.md to use markdown * Add CONTRIBUTING guidelines. * Adding coding style documentation. * Enable EVP_MD_FLAG_FIPS flag for SHA-*. * Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0 * Fix SHA512 EVP digest struct to use EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0 * Fix wrong parenthesis * convert libica loading to dlopen() and friends * Add support to DSO on new API of OpenSSL-1.1.0 - Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch - Added BuildRequires for autoconf, automake, and libtool. - Updated BuildRequires for libica-devel to be >= 3.1.1 - Now that the openSSL engines directory is versioned: * Modified the spec file to query the libcrypto package for which directory to install the engine into. * Removed openssl-ibmca-fix-enginepath.patch. Replaced it with a sed command so that it will provide the correct versioned engines directory - Removed openssl-ibmca-configure.patch. It doesn't seem to be needed any longer. - Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113) - Added libica-tools to the BuildRequires due to repackaging of libica. - Renamed BuildRequires from libica2-devel to libica-devel for the same reason. - Tweaked a comment to get rid of an rpmlint warning message. - fixed ssl configuration merging (bsc#1004463) - openssl-ibmca-fix-enginepath.patch: fix the engine path - Use macro for configure (fate#319941) - Use url for source - Enable parallel building - Cleanup spec file with spec-cleaner - Upgraded to version 1.3.0 (fate#319941) - Updated openssl-ibmca-configure.patch to apply cleanly - Removed obsolete patches - openssl-ibmca-README.patch - openssl-ibmca-sha256-digest-length.patch - openssl-pkey.patch - openssl-des-ede.patch - Did some spec file cleanup. - Fixed %post script to update library path (the only dynamic part of the ibmca configuration) every time the package is installed. (bsc#966139) - Updated AUTHORS, INSTALL, and README (bsc#942839) - %post and %postun added to properly update openssl.cnf (bsc#942839) - Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138) - Remove dependency on fillup anf insserv; the package provides neither sysconfig file nor sysvinit script - Remove depreciated AUTHORS section - Use %configure macro - Add openssl-ibmca-configure.patch - the openssl engines moved to /%_lib/engines bnc#905480 - Forced requirement of libica-2_3_0 (bnc#890824) - openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922) - openssl-pkey.patch: defer HMAC signing to pkey framework, fixes fips self-test during EC key creation (bnc#879922) - spec file cleaned up a bit - openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message digest length definition in sha256 template (bnc#868275) - update to 1.2.0 - removed patches: ibmca-configure.patch ibmca-segfault.fix.patch ibmca-sw-fix.patch openssl-ibmca-1.0.0.rc2-memset-fix.patch - make it exclusivearch for s390/s390x as the required libica is only available for s390/s390x - Made required libica-2_1_0 s390 specific - Added x86_64 to ExclusiveArch as %ix86 doesn't do it - Removed libica requirement - allowing build process to find it - Added COPYING to %files - Requiring libica 2.1.0 or greater - enable ppc64le - fix build (add autoconf automake libtool to BuildRequires) - disable libtool --finish call - own engines directory - package baselibs.conf - obsolete old -XXbit packages (bnc#437293) - added baselibs.conf file to build xxbit packages for multilib support - added fixes by IBM (bug #243801): ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM object ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM object openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem - updated README (bug #185508) - Fixed configure.in to build correctly - Fixed spec file - Initial version from Mike Halcrow
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1164459
from
Nikolay Gueorguiev (ngueorguiev)
(revision 60)
- Amended the .spec file (bsc#1221627) * Removed the flavors
buildservice-autocommit
accepted
request 1159245
from
Nikolay Gueorguiev (ngueorguiev)
(revision 59)
baserev update by copy to link target
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1159244
from
Nikolay Gueorguiev (ngueorguiev)
(revision 58)
Updated the .spec file.
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1159117
from
Nikolay Gueorguiev (ngueorguiev)
(revision 57)
- Updated the .spec file (bsc#1218933, bsc#1221627) * Amended the .spec file to use modulesdir variable - Implemented _multibuild environment (openssl1, engine, provider) - Added a flag and logic for provider in the .spec file * When provider is set to 1, it 'configures' the provider * When provider is set to 0, it 'configures' the engine
buildservice-autocommit
accepted
request 1117655
from
Nikolay Gueorguiev (ngueorguiev)
(revision 56)
baserev update by copy to link target
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1117654
from
Nikolay Gueorguiev (ngueorguiev)
(revision 55)
- Removed an obsolete patch (implemented in the version 2.4.1) * openssl-ibmca-engine-noregister.patch - Upgrade to version 2.4.1 (jsc#PED-5422) * Provider: Change the default log directory to /tmp * Bug fixes
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1088271
from
Nikolay Gueorguiev (ngueorguiev)
(revision 54)
- Updated the .spec file, amended to use libica4 instead of libica * Requires: libica4 >= 4 - Updated the .spec file * uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries - Updated the .spec file as follow: * BuildRequires: libica-devel >= 4.0.0 * BuildRequires: libica-tools >= 4.0.0 - Added dependency on libica4 (bsc#1209038) * BuildRequires and Requires statements in .spec file for libica4 - Applies a patch (bsc#1210359) * openssl-ibmca-engine-noregister.patch - Updated the '#dynamic_path' line, as it was before, with the comment '#'. - Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059) * openssl-ibmca 2.4.0 - Provider: Adjustments for OpenSSL versions 3.1 and 3.2 - Provider: Support RSA blinding - Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding - Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding - Provider: Adjustments in OpenSSL config generator and example configs - Engine: EC: Cache ICA key in EC_KEY object (performance improvement) - Engine: Enable RSA blinding - Updated .spec file removed '#' from the line containing 'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038) - Added in %files * /usr/lib64/engines-3/ibmca-provider.la * /usr/lib64/engines-3/ibmca-provider.so - Upgraded to version 2.3.1 (jsc#PED-597) * openssl-ibmca 2.3.1 - Adjustments for libica 4.1.0 * openssl-ibmca 2.3.0 - First version including the provider - Fix for engine build without OpenSSL 3.0 sources * openssl-ibmca 2.2.3 - Fix PKEY segfault with OpenSSL 3.0 * openssl-ibmca 2.2.2 - Fix tests with OpenSSL 3.0 - Build against libica 4.0 - Removed a Requires for libica from the specfile. - Removed the obsolete baselibs.conf file - Completely revamped the postinstall scriptlet so that it doesn't need to know or care about how many lines are in either /etc/ssl/openssl.cnf, or the sample file at /usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample We're now using the ".include" directive for the openssl.cnf file, and only modifying that file the minimum necessary to implement the change. (bsc#1004463) - Upgraded to version 2.2.1 (jsc#SLE-18333) * openssl-ibmca 2.2.1 Bug fixes * openssl-ibmca 2.2.0 Implement fallbacks based on OpenSSL Disable software fallbacks from libica Allow to specify default library (libica vs. libica-cex) to use Provide "libica" engine ctrl to switch library at load time Update README.md Remove libica link dependency Generate sample configuration files from system configuration Restructure registration global data * openssl-ibmca 2.1.3 Bug fix * openssl-ibmca 2.1.2 Bug fixes - Modified spec file to * Define a global variable enginesdir the same was as IBM does instead of _ENGINE_DIR as we had been doing. * Implemented %make_build macro according to spec-cleaner * Changed the package description to match IBM's. * Removed the redundant "autoreconf --force --install" - Upgrade to version 2.1.1 (jsc#SLE-13709) * Bug fixes - Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882) Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448 - Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424) * openssl-ibmca 2.0.3 Add MSA9 CPACF support for ECDSA sign/verify - Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch - Changed the ExclusiveArch directive to include s390x only. - The code in e_ibmca.c does a dlopen for libica.so.3, instead of linking against the shared library. As a result, if the package containing libica.so.3 isn't installed, problems occur. Added a "Requires: libica3" to the spec file to fix this. (bsc#1142286) - Made a couple of changes to the spec file based on the output from spec-cleaner. - Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch An Apache HTTP Server was set up with mod_ssl and the openssl ibmca engine using libica and a CEX6A card. Whenever a worker process is cleaned up a segmentation fault occurs. (bsc#1138517) - Upgraded to version 2.0.2 (Fate#325688) * openssl-ibmca 2.0.2 Fix doing rsa-me, altough rsa-crt would be possible. - Upgraded to version 2.0.1 (Fate#325688) * openssl-ibmca 2.0.1 Dont fail when a libica symbol cannot be resolved. - Made multiple changes to the spec file based on spec-cleaner output. - Upgraded to version 2.0.0 (Fate#325688) * openssl-ibmca 2.0.0 Add ECC support. Add check and distcheck make-targets. Project cleanup, code was broken into multiple files and coding style cleanup. Improvements to compat macros for openssl. Don't disable libica sw fallbacks. Fix dlclose logic. * openssl-ibmca 1.4.1 Fix structure size for aes-256-ecb/cbc/cfb/ofb Update man page Switch to ibmca.so filename to allow standalone use Switch off Libica fallback mode if available Make sure ibmca_init only runs once Provide simple macro for DEBUG_PRINTF possibility Cleanup and slight rework of function set_supported_meths - Did some cleanup to the spec file, based on spec-cleanup. - Removed the following obsolete patches: * openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch * openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch * openssl-ibmca-sles15-Update-lib-name-in-documentation.patch - Added the following patches for bsc#1097463 * openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch * openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch * openssl-ibmca-sles15-Update-lib-name-in-documentation.patch - Upgraded to version 1.4.0 * Re-license to Apache License v2.0 * Fix aes_gcm initialization. * Update man page. * Add macros for OpenSSL 0.9.8 compat. * Remove AC_FUNC_MALLOC from configure.ac * Add compat macro for OpenSSL 1.0.1e-fips. * Setting 'foreign' strictness for automake. * Add AES-GCM support. * Rework EVP_aes macros. * Remove dependency of old local OpenSSL headers. * Fix engine initialization to set function pointers only once. * Remove blank COPYING and NEWS files. * Remove INSTALL and move its content to README.md * Update README.md file to make use of markdown. * Rename README file to README.md to use markdown * Add CONTRIBUTING guidelines. * Adding coding style documentation. * Enable EVP_MD_FLAG_FIPS flag for SHA-*. * Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0 * Fix SHA512 EVP digest struct to use EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0 * Fix wrong parenthesis * convert libica loading to dlopen() and friends * Add support to DSO on new API of OpenSSL-1.1.0 - Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch - Added BuildRequires for autoconf, automake, and libtool. - Updated BuildRequires for libica-devel to be >= 3.1.1 - Now that the openSSL engines directory is versioned: * Modified the spec file to query the libcrypto package for which directory to install the engine into. * Removed openssl-ibmca-fix-enginepath.patch. Replaced it with a sed command so that it will provide the correct versioned engines directory - Removed openssl-ibmca-configure.patch. It doesn't seem to be needed any longer. - Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113) - Added libica-tools to the BuildRequires due to repackaging of libica. - Renamed BuildRequires from libica2-devel to libica-devel for the same reason. - Tweaked a comment to get rid of an rpmlint warning message. - fixed ssl configuration merging (bsc#1004463) - openssl-ibmca-fix-enginepath.patch: fix the engine path - Use macro for configure (fate#319941) - Use url for source - Enable parallel building - Cleanup spec file with spec-cleaner - Upgraded to version 1.3.0 (fate#319941) - Updated openssl-ibmca-configure.patch to apply cleanly - Removed obsolete patches - openssl-ibmca-README.patch - openssl-ibmca-sha256-digest-length.patch - openssl-pkey.patch - openssl-des-ede.patch - Did some spec file cleanup. - Fixed %post script to update library path (the only dynamic part of the ibmca configuration) every time the package is installed. (bsc#966139) - Updated AUTHORS, INSTALL, and README (bsc#942839) - %post and %postun added to properly update openssl.cnf (bsc#942839) - Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138) - Remove dependency on fillup anf insserv; the package provides neither sysconfig file nor sysvinit script - Remove depreciated AUTHORS section - Use %configure macro - Add openssl-ibmca-configure.patch - the openssl engines moved to /%_lib/engines bnc#905480 - Forced requirement of libica-2_3_0 (bnc#890824) - openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922) - openssl-pkey.patch: defer HMAC signing to pkey framework, fixes fips self-test during EC key creation (bnc#879922) - spec file cleaned up a bit - openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message digest length definition in sha256 template (bnc#868275) - update to 1.2.0 - removed patches: ibmca-configure.patch ibmca-segfault.fix.patch ibmca-sw-fix.patch openssl-ibmca-1.0.0.rc2-memset-fix.patch - make it exclusivearch for s390/s390x as the required libica is only available for s390/s390x - Made required libica-2_1_0 s390 specific - Added x86_64 to ExclusiveArch as %ix86 doesn't do it - Removed libica requirement - allowing build process to find it - Added COPYING to %files - Requiring libica 2.1.0 or greater - enable ppc64le - fix build (add autoconf automake libtool to BuildRequires) - disable libtool --finish call - own engines directory - package baselibs.conf - obsolete old -XXbit packages (bnc#437293) - added baselibs.conf file to build xxbit packages for multilib support - added fixes by IBM (bug #243801): ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM object ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM object openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem - updated README (bug #185508) - Fixed configure.in to build correctly - Fixed spec file - Initial version from Mike Halcrow
Nikolay Gueorguiev (ngueorguiev)
accepted
request 1087780
from
Nikolay Gueorguiev (ngueorguiev)
(revision 53)
- Updated the .spec file, amended to use libica4 instead of libica * BuildRequires: libica4 >= 4 * Requires: libica4 >= 4
Nikolay Gueorguiev (ngueorguiev)
committed
(revision 52)
Nikolay Gueorguiev (ngueorguiev)
committed
(revision 51)
Displaying revisions 1 - 20 of 70