baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.14.0
   Features:
    * Support monochrome bar type
    * Apply default color palettes in --file and --data (Logo)
    * Support named variable placeholders in custom module formattion string
     - --title-format '{user-name-colored}{at-symbol-colored}{host-name-colored}'
       is equivalent to --title-format '{6}{7}{8}'
    * Support named color placeholders in custom module formattion string
     - --<module>-format '{#red}' is equivalent to --<module>-format '{#31}'
     - '{#red}' or '{#31}' is preferred over \u001b[31m because is more readable
       and --pipe aware (will be ignored in pipe mode)
     - Supported in Custom module too
     - See fastfetch -h format for detail
    * Add new module InitSystem, which detects the name of init system
     - i.e. process name of pid1. init, systemd, etc
    * Add option --color-separator to set the color of key-value separators
    * Print error reason when vulkan init fails (Vulkan)
   Bugfixes:
    * Don't detect .conf files in --list-config-paths
    * Fix outputColor doesn't work if module keys are disabled

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.13.2:
   Bugfixes:
    - Remove DRM driver version detection feature,
      which caused a performance regression for nouveau drivers (Display, Linux)
    - Don't use *-unknown as display name for Wayland protocol (Display, Linux)
   Features:
    - Add new module Editor which prints editor settings, i.e. $VISUAL or $EDITOR

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.13.1:
   Changes:
    * The long deprecated flag based config files are removed.
     - They can still be used with xargs fastfetch < /path/to/config.conf
     - --gen-config can be used to migrate them to json based config files
    * The long deprecated options --set and --set-keyless are removed.
    * Kernel module now prints kernel name by default
   Features:
    * Support st terminal font detection for font configuration compiled in st binary (TerminalFont, Linux)
    * Add option --color-output to change output color of all modules except Title, Separator
        display.color.output in JSONC config file
    * Add option --<module>-output-color to change output color of one specified module,
      which overrides the global option --color-output
    * Add option --publicip-ipv6 to print IPv6 address (PublicIP)
    * Add new module Loadavg to print load averages (Loadavg)
    * Add new module PhysicalMemory to print information of physical memory devices (PhysicalMemory)
        Requires root permission to work on Linux and FreeBSD
    * Support specifying --logo-width only for --kitty-direct and --iterm (Logo)
    * Add option --localip-show-all-ips to show all IPs assigned to the same interface (LocalIP)
        Default to false
    * Add --cpu-show-pe-core-count to detect and display core count for performance / efficiency cores (CPU)
    * Add new module Bootmgr which prints information of stage 2 bootloader (grub, system-boot, etc)
     - Requires booting in UEFI mode
    * Detect core count for performance / efficiency cores (CPU)
     - Test it with fastfetch --cpu-show-pe-core-count
    * Detect DRM driver version if DRM detection method is used (GPU, Linux)
   Bugfixes:
    * Rename option --temperature-unit to --temp-unit as documented in help messages
    * Fix alternate logo doesn't work with { "type": "builtin" } (Logo)
    * Don't detect clifm and valgrind as a terminal (Terminal, Linux)

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.11.5:
   Changes:
    * Fastfetch will print a colorless ascii logo in --pipe mode for better lolcat compatibility.
      fastfetch | lolcat should work and no --pipe false needed. Previously the logo would be disabled in --pipe mode.
    * --os-file was removed and CMake option -DCUSTOM_OS_RELEASE_PATH=/path/to/os-release was added.
      This option should not used in most cases.
   Bugfixes:
    * Fix possible out-of-bound memory access (#868)
    * Fix doubled output in custom formation (#852)
    * Fix memory leaks when passing informative options
    * Fix JSON config size.ndigits doesn't work
    * Remove --os-file in help messages
   Features:
    * Enable --pipe mode if environment variable $NO_COLOR is set
    * Support Armbian and Proxmox distro detection (OS, Linux)

• Files Changed
• Browse Source

- update to 2.11.3:
  * Features:
    - Add cmake option CUSTOM_AMDGPU_IDS_PATH for specifying custom path of amdgpu.ids
  * Bugfixes:
    - Fix hanging when detecting disconnected network drive (Disk, Windows)
    - Ensure line ending is printed when printing image logo errors (Logo)
    - Revert image logo limitation change in 2.11.2; allow image logo in SSH session and tmux again (#861, Logo)
    - Fix doubled output in custom formation (PhysicalDisk, Windows)
- changes that are from 2.11.2:
  * Changes:
    - Error messages when trying to print image logo will only be printed with --show-errors
    - When generating JSON output, fastfetch will generate an empty array when no result is detected, instead of an error.
  * Bugfixes:
    - Fix segfault in Debian 11 and some old kernels. Regression introduced in 2.11.0 (#845, GPU, Linux)
    - Don't try detecting version of raw sh shell (#849, Shell, Linux)
    - Trim \r on Windows
  * Features:
    - Check xdg state home for nix user packages (#837, Packages, Linux)
    - Disable image logos in ssh and tmux sessions (#839)
    - Support MX Linux distro detection (#847, OS, Linux)
  * Logo:
    - Add KernelOS
    - Fix name of DraugerOS
    - Add missing FF_LOGO_LINE_TYPE_SMALL_BIT flags
    - Add MX2
- changes that are from 2.11.2:
  * Bugfixes:
    - Fix uninitialized variables which can cause crashes (#760 #838, Battery, Android)
    - Don't detect hyfetch as shell when used as backend of hyfetch
    - Fix incorrect information in man page (#828)

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.11.0:
  Changes:
    - Default hideCursor to false. It doesn't make much difference
      but makes user's terminal unusable if fastfetch is not exited correctly.
  Bugfixes:
    - Fix minimum cmake version support
    - Fix wifi detection on platforms that don't use NetworkManager
    - Fix GPU type detection for AMD cards
  Features:
    - Add basic support DE detection support for UKUI (DE, Linux)
    - Make config specified in JSONC overridable by command line flags
     * Note this change only make global config overridable; module configs are still not
    - Suggest increasing --processing-timeout when child process timeouts
    - Only detect folders that specified by --disk-folders
     * Previously --disk-folders only omits unmatched disks from output.
       This option can be used to improve detection performance by ignoring slow network drives

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.10.2:
  Changes:
    * We now always detect max frequency of GPUs for consistent, instead of current frequency
  Features:
    * Improve display detection for wlroots based WMs. Fastfetch now correctly reports fractional scale factors in hyprland (Display, Linux)
    * Improve GPU detection on Linux (GPU, Linux)
        - Support GPU memory usage detection for AMD GPUs
        - Support GPU frequency detection for Intel GPUs
    * Improve performance of Gnome version detection (DE, Linux)
    * Improve performance of kitty version detection (Terminal, Linux)
    * Detect refresh rate when using --ds-force-drm sysfs-only (Display, Linux)
    * Add option --ts-version to disable terminal and shell version detection. Mainly for benchmarking purposes
    * Improve performance of detecting WSL version (Host, Linux)
  Bugfixes:
    * Correctly detect /bin/sh as current shell if it's used as default shell (Shell, Linux)
    * Work around an issue which CPU module reports incorrect CPU frequency that is too high (CPU, Linux)
    * Don't print ANSI escape codes in --pipe mode

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.9.2:
  Changes:
    * To make use of the newly introduced `yyjson` flag `YYJSON_WRITE_NEWLINE_AT_END`, fastfetch now requires `yyjson` 0.9.0 or later
  Features:
    * Always add a final new-line when generating JSON output
    * Detect partition create time, which can be used as OS installation time (Disk)
    * Print time string when generating JSON result instead of UNIX epoch time number, which is more human-readable
  Bugfixes:
    * Fix a memory leak
    * Fix parsing of option `--packages-disabled` (Packages)
    * Don't use command `time` as a shell (Shell)
  Logos:
    * Add openSUSE MicroOS
    * Fix color of AOSC OS

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.9.1:
  * Support weston-terminal (missed commit in v2.9.0)
    (TerminalFont, Linux)
  * Support hyprcursor detection
  * Fix `fastfetch --gen-config` raises SIGSEGV when
    `~/.config/fastfetch` doesn't exist. Regression of `2.9.0`

  **BREAKING**
  We are deprecating flags based config files (will be removed in v3.0.0).
  We suggest you migrate to json based config files.
  One may use `-c /path/to/config.conf --gen-config` to migrate existing flag
    * Fix segfaults on first use of new images with Sixel flag (Image)

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.9.0:
  Features:
    * Support Lxterminal version detection (Terminal, Linux)
    * Support weston-terminal version and font detection (TerminalFont, Linux)
    * Support am package manager detection (Packages, Linux)
    * Support network prefix length detection for IPv6 (LocalIP)
    * Display all IPs when multiple IPs are assigned to the same interface (LocalIP)
    * Add option --localip-show-prefix-len to show network prefix length for both IPv4 and IPv6. Defaults to true (LocalIP)
  Bugfixes:
    * Fix network prefix length detection when the value is greater than 24 (LocalIP, Linux)
    * For xfce4-terminal, use system mono font if no config file is found (TerminalFont, Linux)

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source