- Update to version 2.7.1:
  For more see NEWS and UPGRADING in /usr/share/doc/packages/nut.
  Potentially incompatible changes:
  * First release after the transition from Subversion to Git.
  * The linkman:apcsmart[8] driver has been replaced by a new
    implementation. There is a new parameter, 'ttymode'.  In case
    of issues with this new version, users can revert to
    apcsmart-old.
  * The linkman:nutdrv_qx[8] driver will eventually supersede
    blazer_ser and blazer_usb.  Options are not exactly the same,
    but are documented in the nutdrv_qx man page.
  * Mozilla NSS support has been added.
  * linkman:upsrw[8] now prints out the maximum size of
    variables.
  Other changes:
  * Added a new driver, nutdrv_qx, for Megatec/Qx devices. This
    driver will eventually replace the blazer_ser and blazer_usb
    drivers. In particular, it adds support for Voltronic Power
    devices.
  * Increased USB_TIMEOUT to standards-compliant 5.000 seconds in
    most drivers.  This should reduce the number of timeouts on
    low-speed USB 1.1 devices.
  * Added many devices to the HCL. Of particular note are many
    Tripp Lite USB HID PDC models which were tested against NUT by
    Tripp Lite.
  * Reworked some visual elements of the HCL.
  * Also increased timeouts and added redundant commands to improve
    reliability of mge-utalk driver.
  * Added the apcupsd-ups driver to interoperate with apcupsd
    installations.
  * Added documentation on creating subdrivers for snmp-ups and
    nutdrv_qx.
  * Added new drivers for the Riello UPS product line
    (riello_ser/riello_usb).
  * Many improvements to the BCM/XCP.
  * Added a few variables to the Powercom HID mappings.
  * Updated the apcsmart driver, and renamed the previous driver to
    apcsmart-old.
  * Fixed the battery percentage calculation in the bestfcom
    driver.
  * libnutclient has been added as a C++ alternative to
    libupsclient.
  * Fix shutdown of Eaton HID, using usbhid-ups and mge-shut
  * usbhid-ups: final fix for APC Back UPS ES.
  * nut-scanner: fix crash
  * IPMI support can handle more different versions of FreeIPMI
  * Support power supplies scan over the network nut-scanner can
    now scan for power supplies with IPMI over LAN.  This is
    currently limited to IPMI 1.5 only
  * Improve systemd integration
  * snmp-ups: Fixed a crash on outlet management, and added
    delta_ups MIB support. Also fixed mappings for
    upsBypassVoltage, upsBypassCurrent, and upsBypassPower in
    three-phase IETF MIB.
- Enable FreeIPMI.
- Turn systemd integration on (nut-systemd-dirs.patch).
- Fix README.SUSE.
- nut-preconfig.patch: Fix UID recommendation.

This is exactly like request 221664, just Source URI was fixed and ENABLE_IPMI was replaced by the correct distro+arch version and, since request 222080, only changelog was fixed.

• Files Changed
• Browse Source