- remove env-shebang from /usr/lib/kernel/install.d/50-mkosi.install
- Create new subpackage mkosi-initrd
- Add file %{_prefix}/lib/mkosi-initrd/mkosi.conf
- Update to 24.3:
  * Check for $HOME environment variable as well.
- Update to 24.2:
  * Look for $USER for the username before reading /etc/passwd
- Update to 24.1:
  * completion: fix bash completion script
  * Add some documentation on how to implement a new distribution
  * Add missing init.py to mkosi/initrd/resources
  * Handle dangling symlinks in rmtree() and run_clean()
  * Handle failure to detect the distribution in test_parse_config()
- Update to 24:
  * The default kernel command line of console=ttyS0 (or equivalent for
    other architectures) has been removed. The required console=
    argument to have the kernel output to the serial console has to be
    added manually from v24 onwards.
  * Support for installing local packages located in directories in
    BuildSources= was dropped. Instead, the packages can be made
    available for installation via PackageManagerTrees=.
  * Configuration parsing was reworked to remove the need for the @
    specifier and to streamline building multiple images with
    mkosi.images/. If you were building multiple images with
    mkosi.images/, you'll need to adapt your configuration to the
    rework. Read the Building multiple images section in the
    documentation for more information.
  * mkosi has gained the option to generate completion scripts for bash,
    fish and zsh. Packagers should generate the scripts during packaging
    and ship them in the appropriate places.
  * Added support for CentOS Stream 10.
  * mkosi now installs a separate mkosi-initrd script that can be used
    to build initramfs images intended for use on the local system.
  * We do not automatically append centos-stream or fedora anymore to
    CentOS (and derivatives) and Fedora mirrors specified with Mirror=
    as not all mirrors store the repository metadata under these
    subdirectories. Users are now required to add these subdirectories
    themselves in Mirror=. If the EPEL repositories are enabled for
    CentOS Stream (and derivatives) and Mirror= is used, we look for the
    EPEL repositories in ../fedora relative to the mirror specified in
    Mirror=.
  * We now support compressed tar archives wherever we already accept tar
    archives as input.
  * We now always rerun the build if Format=none and don't remove
    previous outputs in that case (unless --force is specified). This
    allows using mkosi -t none to rerun the build scripts without
    removing the previous image. This can then be combined with
    RuntimeBuildSources=yes to make the build script outputs available
    in a booted container or virtual machine so they can be installed
    without having to rebuild the image.
  * We now use virtconsole to provide the serial console when booting
    with qemu.
  * root=PARTUUID and mount.usr=PARTUUID on the kernel command line
    are now automatically extended with the actual PARTUUID of the
    corresponding partition.
  * All available OpenSUSE repositories are now supported and can be
    enabled with Repositories=.
  * Building OpenSUSE aarch64 images is now supported
  * mkosi dependencies was beefed up to handle more scenarios properly
  * The default list of kernel modules that are always added to the
    initramfs was extended with various virtualization modules.
  * Added a Repositories= match.
  * Cached images are now invalidated if packages specified via
    PackageDirectories= change.
  * Added VolatilePackageDirectories= which can be used to provide local
    packages that do not invalidate cached images.
  * mkosi.pkgmngr is now used as the default path for
    PackageManagerTrees=.
  * The package directory that build scripts can use to make built
    packages available for installation ($PACKAGEDIR) is now shared
    between all image builds. This means that packages built in earlier
    images and stored in $PACKAGEDIR become available for installation
    in all subsequent image builds.
  * The default tools tree distribution is now chosen based on the host
    distribution instead of the target distribution.
  * mkosi can now be invoked from the initramfs.
- Update package summary and description.
  * BIOS support was removed in v14, but restored in v16.
- Remove dnf dependency.
  * With openSUSE, zypper is a sufficient requirement for mkosi to work.
- Removed obsolete patch  opensuse-dont-install-distribution-release-by-default.patch
- Update to 23.1:
  * Respin due to git tag mismatch
- Update to 23:
  * Added CleanScripts= to allow running custom cleanup code whenever
    mkosi cleans up the output directory. This allows cleaning up extra
    outputs produced by e.g. a build script that mkosi doesn't know about.
  * Added ConfigureScripts= to allow dynamically modifying the mkosi
    configuration. Each configure script receives the current config as
    JSON on stdin and should output the new config as JSON on stdout.
  * When building a UKI, we don't measure for the TPM SHA1 PCR bank
    anymore.
  * All keys in the mkosi config JSON output are now in pascal case,
    except for credentials and environments, where the keys encode names
    of credentials and environment variables and are therefore case
    sensitive.
  * Added various settings to allow running mkosi behind a proxy.
  * Various fixes to kernel module filtering that should result in fewer
    modules being pulled into the default initrd when
    KernelModulesExclude= or KernelModulesInitrdExclude= are used.
  * Added ToolsTreeDistribution= match.
  * Removed vmspawn verb and replaced it with VirtualMachineMonitor=.
  * New specifiers for various directories were added. %D resolves to
    the directory that mkosi was invoked in, %P to the current working
    directory, and %C to the parent directory of the config file.
  * Added ForwardJournal= to have systemd inside a container/VM forward
    its journal to the specified file or directory.
    Systemd scopes are now allocated for qemu, swtpm, virtiofsd and
    systemd-journal-remote if available.
  * The mkosi qemu virtual machine is now registered with
    systemd-machined if available.
  * Added new oci output format
  * Runtime trees without a target are now mounted to /root/src instead
    of a subdirectory of it (To have the same behaviour as
    BuildSources=).
  * Added RuntimeBuildSources= to mount build and source directories
    when booting the image with mkosi nspawn or mkosi qemu.
    Introduced --append to allow command line settings to be parsed
    after parsing configuration files.
  * distribution-release is not installed by default anymore on
    OpenSUSE.
  * Setting QemuSmp= to 0 will now make qemu use all available CPUs
  * Free page reporting and discard request processing are now enabled by
    default in VMs spawned by mkosi qemu.
  * Added ToolsTreeCertificates= to allow configuring whether to use
    certificates and keys from the tools tree (if one is used) or the
    host.
  * Added never for CacheOnly= to specify that repository metadata
    should always be refreshed.
  * Renamed the none option for CacheOnly= to auto.
  * Added ProxyExclude= to configure hostnames for which requests should
    not go through the configured proxy.
  * The default tools tree is now reused on incremental builds.
  * Added VolatilePackages= and InitrdVolatilePackages= to configure
    packages that should be installed after executing build scripts and
    which should not be cached when using Incremental=.
  * PackageDirectories= now has an associated default path
    mkosi.packages.
  * reprepro is now used to generate local apt repositories.
  * Support for BSD tar/cpio was dropped.
  * When both ExtraSearchPaths= and ToolsTree= are used, mkosi will
    now prefer running a binary found in ExtraSearchPaths= without the
    tools tree over running the binary from the tools tree. If a binary is
    not found in ExtraSearchPaths=, the tools tree is used instead.
  * An artifact directory is now made available when running scripts which
    can be used to pass around data between different scripts. mkosi will
    also look for microcode and initrds in the artifact directory under
    the io.mkosi.microcode and io.mkosi.initrd subdirectories.
  * Added Environment= match setting to check for environment variables
    defined with the Environment= setting.
  * The basesystem package is now always installed in Fedora and
    CentOS images instead of the filesystem package.
  * The qemu, shell and boot verbs do not automatically build the
    image anymore unless --force is specified.
  * SplitArtifacts= is now supported for the portable, sysext and
    confext outputs.
  * The WithDocs= option was implemented for pacman-based distributions.
  * The default Fedora release was bumped to 40.
  * QemuSwtpm= can now be used with QemuFirmware= set to linux or
    bios.
  * Added UnitProperties= to allow configure properties on the scopes
    generated by systemd-nspawn and systemd-run.
  * mkosi now only builds a single default tools tree per build using the
    settings from the last regular image that we'll build.
  * Configure scripts are now only executed for verbs which imply an image
    build and are executed with the tools tree instead of without it.
  * $QEMU_ARCHITECTURE is now set for configure scripts to easily allow
    scripts to figure out which qemu binary will be used to run qemu.
  * A file ID can now be specified for QemuDrives=. This allows adding
    multiple qemu drives that are backed by the same file.
  * mkosi doesn't fail anymore if images already exist when running
    mkosi build.
  * Image names from mkosi.images/ are now preferred over the specified
    image ID when determining the output filename to use for an image.
    --include now has a shorthand option -I.
  * The WITH_NETWORK environment variable is now passed to build and
    finalize scripts.
  * We now clamp mtimes to the specified source date epoch timestamp
    instead of resetting all mtimes. This means that we won't touch any
    mtimes that are already older than the given source date epoch
    timestamp.
  * Removed support for CentOS 8 Stream as it is now EOL.
  * The coredumpctl and journalctl verbs now operrate on the path
    specified in ForwardJournal= if one is set.
  * Added UnifiedKernelImageFormat= format setting to allow configuring
    the naming of unified kernel images generated by mkosi.
  * The versionlock plugin is now enabled by default for dnf with a noop
    configuration.
  * Repositories= is now implemented for zypper.
  * KernelModulesInclude= and KernelModulesInitrdInclude= now take the
    special values host and default to include the host's loaded
    modules and the default kernel modules defined in mkosi-initrd
    respectively.
  * KernelModulesIncludeHost= and KernelModulesInitrdIncludeHost= are
    now deprecated.
  * Added mkosi dependencies to output the list of packages required by
    mkosi to build and boot images.
- Drop requirement on systemd-experimental.
  It's no longer necessary as systemd-repart is no more considered as an
  experimental tool and is now shipped by udev. Also the hard requirement was a
  bit too strong since systemd-repart is only required when building disk
  images.
- Add opensuse-dont-install-distribution-release-by-default.patch 
- Correct dependencies after discussions with upstream
  * Requires: systemd-experimental for systemd-repart needed to build disk images
  * Requires: bubblewrap as bbwrap is called during build
  * Requires: zypper
  * Recommends: squashfs, tar, and xz as they are all optional features
  * Remove recommends for tools they no longer support
- Update to 22:
  * We'll now try to delete btrfs subvolumes with btrfs subvolume delete
    first before falling back to recursively deleting the directory.
  * The invoking user is now always mapped to root when running sync
    scripts. This fixes an issue where we would fail when a package
    manager tree or skeleton tree contained a /usr directory as we would
    not have permissions to run mount in the sandbox.
  * We now use qemu's official firmware descriptions to find EDK2/OVMF
    UEFI firmware. Addititionally, QemuFirmware=uefi now boots without
    SecureBoot support, and QemuFirmware=uefi-secure-boot was introduced
    to boot with SecureBoot support. By default we will still boot with
    SecureBoot support if QemuFirmware=auto.
  * Added support for QemuFirmwareVariables=custom and
    QemuFirmwareVariables=microsoft to use OVMF/EDK2 variables with
    either the user's custom keys enrolled or with the Microsoft keys
    enrolled.
  * Added UnifiedKernelImages= to control whether we generate unified
    kernel images or not.
  * Bootloader=grub will now generate a grub EFI image and install it.
    If SecureBoot= is enabled and ShimBootloader= is not set to
    signed, the grub EFI image will be signed for SecureBoot.
  * ShimBootloader=signed will now also instruct mkosi to look for and
    install already signed grub, systemd-boot, kernel and UKI binaries.
  * We now build grub images with a fixed set of modules and don't copy
    any grub modules to the ESP anymore.
  * The configuration is now made available as a JSON file to all mkosi
    scripts via the $MKOSI_CONFIG environment variable.
  * $PROFILE is now set for all mkosi scripts containing the value of
    Profile= if it is set.
- Update to 21:
  * We now handle unmerged-usr systems correctly
  * Builtin configs (mkosi-initrd, mkosi-tools) can now be included
    using Include= (e.g. Include=mkosi-initrd)
  * The kernel-install plugin now uses the builtin mkosi-initrd
    config so there's no need anymore to copy the full mkosi-initrd
    config into /usr/lib/mkosi-initrd.
  * We don't require a build anymore for the journalctl and
    coredumpctl verbs.
  * mkosi ssh works again when used with ToolsTree=default
  * We now use .zst instead of .zstd for compressed split artifacts
    produced by systemd-repart.
  * systemd-repart uses a persistent temporary directory again for
    assembling images instead of a tmpfs.
  * Added MicrocodeHost= setting to only include the CPU specific
    microcode for the current host system.
  * The kernel-install plugin now only includes the CPU specific
    microcode
  * Introduced PackageCacheDirectory= to set the directory for
    package manager caches. This setting defaults to a suitable
    location in the system or user directory depending on how mkosi
    is invoked.
  * CacheDirectory= is only used for incremental cached images now.
  * Repository metadata is now synced once at the start of each
    image build and never during an image build. Each image
    includes a snapshot of the repository metadata in the canonical
    locations in /var so that incremental images and extension
    images can reuse the same snapshot. When building an image
    intended to be used with
  * BaseTrees=, disable CleanPackageMetadata= to make sure the
    repository metadata in /var is not cleaned up, otherwise any
    extension images using this image as their base tree will not
    be able to install additional packages.
  * Implemented CacheOnly=metadata. Note that in the JSON output,
    the value of CacheOnly= will now be a string instead of a
    boolean.
  * Added CompressLevel= to set the compression level to use.
  * Dropped experimental Gentoo support.
  * Added TriggerMatch= to specify multiple match sections of which
    only one should be satisfied.
  * Added jq, attr, acl, git, sed, grep and findutils to the
    default tools tree.
  * Added mkosi-install, mkosi-upgrade, mkosi-remove and
    mkosi-reinstall scripts which allow writing scripts that are
    independent of the package manager being used to build the
    image.
  * We now expand specifiers in Match section values
  * Made GPG key handling for Fedora rawhide more robust
  * If systemd-repart 256 or newer is available, mkosi will
    instruct it to generate /etc/fstab and /etc/crypttab for the
    image if any partition definitions contain the corresponding
    settings (MountPoint= and EncryptedVolume=).
  * bash is now started in the debug shell instead of sh.
  * The default release for Ubuntu is now noble.
  * Ubuntu is now used as the default tools tree distribution for
    Ubuntu instead of Debian.
  * Added mkosi vmspawn which boots the image with systemd-vmspawn.
  * Note that systemd-vmspawn is experimental and its interface
    may still change. As such mkosi vmspawn is also considered
    experimental.
  * Note that systemd-vmspawn version 256 or newer is required.
  * Added SyncScripts= which can be used to update various build
    sources before starting the image build.
  * The DISTRIBUTION= and RELEASE= environment variables are now
    set when running scripts.
  * Added ToolsTreeRepositories= and ToolsTreePackageManagerTrees=.
  * Added RuntimeNetwork= to configure the networking used when
    booting the image.
  * Added SecureBootKeySource= and VerityKeySource= to support
    signing images with OpenSSL engines. Note that these settings
    require various systemd tools to be version 256 or newer.
  * We don't clean up package manager metadata anymore unless
    explicitly requested with CleanPackageManagerMetadata=yes when
    building directory and tar images.
- update to 20.2:
  * Fixed a bug in signing unsigned shim EFI binaries.
  * We now build an early microcode initrd in the mkosi kernel-
    install plugin.
  * Added `PackageDirectories=` to allow providing extra packages
    to be made available during the build.
  * Fixed issue where `KernelModulesIncludeHost` was including
    unnecessary modules
  * Fixed `--mirror` specification for CentOS (and variants) and
    Fedora.
  * Previously a subdirectory within the mirror had to be
    specified which prevented using CentOS and EPEL repositories
    from the same mirror. Now only the URL has be specified.
  * We now mount package manager cache directories when running
    scripts on the host so that any packages installed in scripts
    are properly cached.
  * We don't download filelists on Fedora anymore
  * Nested build sources don't cause errors anymore when trying
    to install packages.
  * We don't try to build the same tools tree more than once
    anymore when building multiple images.
  * We now create the `/etc/mtab` compatibility symlink in
    mkosi's sandbox.
  * We now always hash the root password ourselves instead of
    leaving it to `systemd-firstboot`.
  * `/srv` and `/mnt` are not mounted read-only anymore during
    builds.
  * Fixed a crash when running mkosi in a directory with fewer
    than two parent directories.
  * Implemented `RepositoryKeyCheck=` for apt-based
    distributions.
- update to 20.1:
  * `BuildSources=` are now mounted when we install packages so
    local packages can be made available in the sandbox.
  * Fixed check to see if we're running as root which makes sure
    we don't do shared mounts when running as root.
  * The extension release file is now actually written when
    building system or configuration extensions.
  * The nspawn settings are copied to the output directory again.
  * Incremental caching is now skipped when `Overlay=` is enabled
    as this combination isn't supported.
  * The SELinux relabel check is more granular and now checks for
    all required files instead of just whether there's a policy
    configured.
  * `qemu-system-xxx` binaries are now preferred over the generic
    `qemu` and `qemu-kvm` binaries.
  * Grub tools from the tools tree are now used to install grub
    instead of grub tools from the image itself. The grub tools
    were added to the default tools trees as well.
  * The pacman keyring in tools trees is now only populated from
    the Arch Linux keyring (and not the Debian/Ubuntu ones anymore).
  * `gpg` is allowed to access `/run/pscsd/pscsd.comm` on the
    host if it exists to allow interaction with smartcards.
  * The current working directory is not mounted unconditionally
    to `/work/src` anymore. Instead, the default value for
    `BuildSources=` now mounts the current working directory
    to `/work/src`. This means that the current working directory
    is no longer implicitly included when `BuildSources=` is
    explicitly configured.
  * Assigning the empty string to a setting that takes a list of
    values now overrides any configured default value as well.
  * The github action does not build and install systemd from
    source anymore. Instead, `ToolsTree=default` can be used to
    make sure a recent version of systemd is used to do the image
    build.
  * Added `EnvironmentFiles=` to read environment variables from
  * environment files.
  * We drastically reduced how much of the host system we expose
    to scripts. Aside from `/usr`, a few directories in `/etc`,
    `/tmp`, `/var/tmp` and various directories configured in mkosi
    settings, all host directories are hidden from scripts,
    package managers and other tools executed by mkosi.
  * Added `RuntimeScratch=` to automatically mount a directory
    with extra scratch space into mkosi-spawned containers and
    virtual machines.
  * Package manager trees can now be used to configure every tool
    invoked by mkosi while building an image that reads config
    files from `/etc` or `/usr`.
  * Added `SELinuxRelabel=` to specify whether to relabel selinux
    files or not.
  * Many fixes to tools trees were made and tools trees are now
    covered by CI. Some combinations aren't possible yet but
    we're actively working to make these possible.
  * `mkosi qemu` now supports direct kernel boots of `s390x` and
    `powerpc` images.
  * Added `HostArchitecture=` match to match against the host
  * architecture.
  * We don't use the user's SSH public/private keypair anymore
    for `mkosi ssh` but instead use a separate key pair which
    can be generated by `mkosi genkey`. Users using `mkosi ssh`
    will have to run `mkosi genkey` once to generate the necessary
    files to keep `mkosi ssh` working.
  * We don't automatically set `--offline=no` anymore when we
    detect the `Subvolumes=` setting is used in a `systemd-repart`
    partition definition file. Instead, use the new
    `RepartOffline=` option to explicitly disable running
    `systemd-repart` in offline mode.
  * During the image build we now install UKIs/kernels/initrds to
    `/boot` instead of `/efi`. While this will generally not be
    noticeable, users with custom systemd-repart ESP partition
    definitions will need to add `CopyFiles=/boot:/` along with
    the usual `CopyFiles=/efi:/` to their ESP partition
    definitions. By installing UKIs/kernels/initrds
    to `/boot`, it becomes possible to use `/boot` to populate an
    XBOOTLDR partition which wasn't possible before. Note that
    this is also safe to do before `v20` so `CopyFiles=/boot:/`
    can unconditionally be added to any ESP partition definition
    files.
  * Added `QemuFirmwareVariables=` to allow specifying a custom
    OVMF variables file to use.
  * Added `MinimumVersion=` to allow specifying the minimum
    required mkosi version to build an image.
  * Added support for Arch Linux's debug repositories.
  * Merged the mkosi-initrd project into mkosi itself. mkosi-
    initrd is now used to build the default initrd.
  * Implemented mkosi-initrd for all supported distributions.
  * Added `ShimBootloader=` to support installing shim to the
    ESP.
  * Added sysext, confext and portable output formats. These will
    produce signed disk images that can be used as sysexts,
    confexts and portable services respectively.
  * Added `QemuVsockConnectionId=` to configure how to allocate
    the vsock connection ID when `QemUVsock=` is enabled.
  * Added documentation on how to build sysexts with mkosi.
  * Global systemd user presets are now also configured.
  * Implemented `WithDocs=` for `apt`.
  * On supported package managers, locale data for other locales
    is now stripped if the local is explicitly configured using
    `Locale=`.
  * All `rpm` plugins are now disabled when building images.
  * Added `KernelModulesIncludeHost=` and
    `KernelModulesInitrdIncludeHost=` to only include modules
    loaded on the host system in the image/initrd respectively.
  * Implemented `RemovePackages=` for Arch Linux.
  * Added `useradd` and `groupadd` scripts to configure these
    binaries to operate on the image during builds instead on
    the host.
  * Added microcode support. If installed into the image, an
    early microcode initrd will automatically be built and
    prepended to the initrd.
  * A passwordless root account may now be created by specifying
    `hashed:`.
  * The `Autologin=` feature was extended with support for
    `arm64`, `s390x` and `powerpc` architectures.
  * Added `SecureBootAutoEnroll=` to control automatic enrollment
    of secureboot keys separately from signing `systemd-boot`
    and generated UKIs.
  * `ImageVersion=` is no longer automatically appended to the
    output files, instead this is automatically appended to
    `Output=` if not specified and results in the `%o` specifier
    being equivalent to `%i` or `%i_%v` depending on whether
    `ImageVersion=` is specified.
Mon Nov  20 09:21:06 UTC 2023 - Fredrik Lönnegren <fredrik.lonnegren@suse.com>
- update to v19:
  * Support for RHEL was added!
  * Added journalctl and coredumpctl verbs for running the respective tools on
    built directory or disk images.
  * Added a burn verb to write the output image to a block device.
  * Added a new esp output format, which is large similar to the existing uki
    output format but wraps it in a disk image with only an ESP.
  * Presets were renamed to Images. mkosi.images/ is now used instead of
    mkosi.presets/, the Presets= setting was renamed to Images= and the Presets
    section was merged into the Config section. The old names can still be used
    for backwards compatibility.
  * Added profiles to support building variants of the same image in one
    repository. Profiles can be defined in mkosi.profiles/ and one can be
    selected using the new Profile= setting.
  * mkosi will now parse mkosi.local.conf before any other config files if that
    exists.
  * Added a kernel-install plugin. This is only shipped in source tree and not
    included in the Python module.
  * Added a --json option to get the output of mkosi summary as JSON.
  * Added shorthand -a for --autologin.
  * Scripts with the .chroot extension are now executed in the image
    automatically.
  * Added rpm helper script to have rpm automatically operate on the image when
    running scripts.
  * Added mkosi-as-caller helper script that can be used in scripts to run
    commands as the user invoking mkosi.
  * mkosi-chroot will now start a shell if no arguments are specified.
  * Added WithRecommends= to configure whether to install recommended packages
    by default or not where this is supported. It is disabled by default.
  * Added ToolsTreeMirror= setting for configuring the mirror to use for the
    default tools tree.
  * WithDocs= is now enabled by default.
  * Added BuildSourcesEphemeral= to make source directories ephemeral when
    running scripts. This means any changes made to source directories while
    running scripts will be undone after the scripts have finished executing.
  * Added QemuDrives= to have mkosi create extra qemu drives and pass them to
    qemu when using the qemu verb.
  * Added BuildSources= match to match against configured build source targets.
  * PackageManagerTrees= was moved to the Distribution section.
  * We now automatically configure the qemu firmware, kernel cmdline and initrd
    based on what type of kernel is passed by the user via -kernel or
    QemuKernel=.
  * The mkosi repository itself now ships configuration to build basic bootable
    images that can be used to test mkosi.
  * Added support for enabling updates-testing repositories for Fedora.
  * GPG keys for CentOS, Fedora, Alma and Rocky are now looked up locally first
    before fetching them remotely.
  * Signatures are not required for local packages on Arch anymore.
  * Packages on opensuse are now always downloaded in advance before
    installation when using zypper.
  * The tar output is now reproducible.
  * We now make sure git can be executed from mkosi scripts without running
    into permission errors.
  * We don't create subdirectories beneath the configured cache directory anymore.
  * Workspace directories are now created outside of any source directories.
    mkosi will either use XDG_CACHE_HOME, $HOME/.cache or /var/tmp depending on
    the situation.
  * Added environment variable MKOSI_DNF to override which dnf to use for
    building images (dnf or dnf5).
  * The rootfs can now be modified when running build scripts (with all changes
    thrown away after the last build script has been executed).
  * mkosi now fails if configuration specified via the CLI does not apply to
    any image (because it is overridden).
  * Added a new doc on building rpms from source with mkosi
    (docs/building-rpms-from-source.md).
  * /etc/resolv.conf will now only be mounted for scripts when they are run
    with network access.
- set singlepython version to python3 instead of python311 to allow build on Leap and not require changes on every Python change in Tumbleweed
Mon Nov  14 08:20:28 UTC 2023 - Fredrik Lönnegren <fredrik.lonnegren@suse.com>
- update to v18:
  * $SCRIPT was renamed to $CHROOT_SCRIPT. $SCRIPT can still be used
    but is considered deprecated.
  * Added RuntimeTrees= setting to mount directories when booting images
    via mkosi boot, mkosi shell or mkosi qemu. The directories are
    mounted with a uid map that maps the user invoking mkosi to the root
    user so that all files in the directory appear as if owned by the root
    user in the container or virtual machine and any new files created in
    the directories are owned by the user invoking mkosi. To make this
    work in VMs, we use VirtioFS via virtiofsd. Note that this
    requires systemd v254 or newer to be installed in the image.
  * Added support for booting directory images with mkosi qemu via
    VirtioFS. When CONFIG_VIRTIOFS and CONFIG_VIRTIO_PCI are builtin
    modules, no initramfs is required to make this work.
  * Added Include= or --include to include extra configuration files
    or directories.
  * Added support for specifiers to access the current value of certain
    settings during configuration file parsing.
  * mkosi will now exit with an error when no configuration was
    provided.
  * Multiple scripts of the same type are now supported.
  * Custom distributions are now supported via the new custom
    distribution. When using custom as the distribution, the rootfs must
    be provided via base trees, skeleton trees or prepare scripts.
  * We now use local GPG keys for rpm based distributions if the
    distribution-gpg-keys package is installed on the host.
  * Added RuntimeSize= to grow the image to a specific size before
    booting it when using mkosi boot or mkosi qemu.
  * We now set MKOSI_UID and MKOSI_GID when running scripts which are
    set to the uid and gid of the user invoking mkosi respectively. These
    can be used to run commands as the user that invoked mkosi.
  * Added an Architecture= match
  * Initrds specified with Initrds= are now used for grub menuentries as
    well.
  * ImageId= and ImageVersion= are now written to os-release as
    IMAGE_ID and IMAGE_VERSION if provided.
  * We pass command line arguments passed to the build verb to the build
    script again.
  * We added support for the "RHEL Universal Base Image" distribution.
- update to v17.1:
  * Fixed bug where --autologin was broken when used in combination with
    a tools tree when using a packaged version of mkosi.
- update to v17:
  * Added ToolsTreePackages= to add extra packages to the default tools
    tree.
  * Added SystemdVersion= match to match on the host's systemd version
  * Added Format= match to match on the configured output format
  * Presets= can now be configured in global configuration files to select
    which presets to build
  * UKIs can now be booted using direct linux boot.
  * We don't try to make images UEFI bootable anymore on architectures
    that do not support UEFI
  * Fixed --help to show all options again
  * We now warn when settings are configured in the wrong section
- update to v16:
  * mkosi.version is now picked up from preset and dropin directories as
    well following the usual config precedence logic
  * Removed the "first assignment wins" logic from configuration parsing.
    Settings parsed later will now override earlier values
  * Removed the ! operator for lists. Instead, assign the empty string
    to the list to remove all previous values.
  * Added support for configuring custom default values for settings by
    prefixing their name in the configuration file with @.
  * Added QemuCdrom= to attach the image to the virtual machine as a
    CD-ROM instead of a block device.
  * Added SectorSize= to set the sector size of the disk images built by
    systemd-repart.
  * Added back grub support (BIOS/UEFI). Note that we don't install grub
    on UEFI yet but we do add the necessary configuration and partitions.
  * Added Bootloader= option to configure which EFI bootloader to
    install. Added uki option to install just the UKI without
    systemd-boot and grub to generate grub configuration to chainload
    into the built UKIs.
  * Added BiosBootloader= to configure whether grub for BIOS gets
    installed or not.
  * Added QemuFirmware= to select which qemu firmware to use (OVMF,
    Seabios or direct kernel boot).
  * Added QemuKernel= to specify the kernel that should be used with
    direct kernel boot.
  * /var/lib/dbus/machine-id is now removed if it was added by a package
    manager postinstall script.
  * The manifest is not generated by default anymore. Use
    ManifestFormat=json to make sure the manifest is generated.
  * Added SourceDateEpoch= to enable more reproducible image builds.
  * Added Seed= to set the seed passed to systemd-repart.
  * Updated the default Fedora release to Fedora 39.
  * If ToolsTree= is set to default, mkosi will now build a default
    tools tree containing all the necessary tools to build images. The
    distribution and release to use can be configured with
    ToolsTreeDistribution= and ToolsTreeRelease= or are determined
    automatically based on the image being built.
  * Added uki output format. This is similar to cpio, except the cpio
    is packaged up as a UKI with a kernel image and stub picked up from
    the rootfs.
- update to v15.1:
  * Migrated to systemd-repart. Many options are dropped in favor of specifying them directly
    in repart partition definition files:
      - Format=gpt_xxx options are replaced with a single "disk" options. Filesystem to use can now be specified with repart's Format= option
      - Format=plain_squashfs (Can be reproduced by a single repart squashfs
        root partition combined with SplitArtifacts=yes)
      - Verity= (Replaced by repart's Verity= options)
      - Encrypt= (Replaced by repart's Encrypt= option)
      - RootSize=, HomeSize=, VarSize=, TmpSize=, ESPSize=, SwapSize=, SrvSize=
        (Replaced by repart's size options)
      - UsrOnly= (replaced with CopyFiles=/:/usr in a usr partition definition)
      - OutputSplitRoot=, OutputSplitVerity=, (Replaced by repart's SplitName= option)
      - OutputSplitKernel= (UKI is now always written to its own output file)
      - GPTFirstLBA (Removed, no equivalent in repart)
      - ReadOnly= (Replaced by repart's ReadOnly= option per partition)
      - Minimize= (Replaced by repart's Minimize= option per partition)
      - CompressFs= (No equivalent in repart, can be replicated by replacing mkfs.
        in $PATH with a script that adds the necessary command line option)
      - MkSquashfs= (Can be replaced with a script in $PATH that invokes
        the correct binary)
  * We also remove the WithoutUnifiedKernelImages= switch as building unified
    kernel images is trivial and fast these days.
  * Support for --qemu-boot was dropped
  * Support for --use-host-repositories was dropped, use --repository-directory instead
  * RepositoryDirectory was removed, use PackageManagerTrees= or SkeletonTrees= instead.
  * --repositories is now only usable on Debian/RPM based distros and can only be used to enable additional
    repositories. Specifically, it cannot be used on Arch Linux anymore to add new repositories.
  * The _epel distributions were removed. Use --repositories=epel instead to enable
    the EPEL repository.
  * Removed -stream from CentOS release specifiers. Instead of specifying 8-stream,
    you know just specify 8.
  * Removed default kernel command line arguments rhgb, selinux=0 and audit=0.
  * Dropped --all and --all-directory as this functionality is better implemented by
    using a build system.
  * mkosi now builds images without needing root privileges.
  * Removed --no-chown, --idmap and --nspawn-keep-unit options as they were made obsolete by moving to
    rootless builds.
  * Removed --source-file-transfer, --source-file-transfer-final, --source-resolve-symlinks and
    --source-resolve-symlinks-final in favor of always mounting the source directory into the build image.
    --source-file-transfer-final might be reimplemented in the future using virtiofsd.
  * Dropped --include-dir option. Usage can be replaced by using --incremental and reading includes from
    the cached build image tree.
  * Removed --machine-id in favor of shipping images without a machine ID at all.
  * Removed --skip-final-phase as we only have a single phase now.
  * The post install script is only called for the final image now and not for the build image anymore. Use the
    prepare script instead.
  * --ssh-key, --ssh-agent, --ssh-port and --ssh-timeout options were dropped as the SSH support was
    reimplemented using VSock. mkosi ssh can only be used with images booted with mkosi qemu. Use
    machinectl to access images booted with mkosi boot. Use --extra-tree or --credential with the
    .ssh.authorized_keys.root credentials as alternatives for provisioning the public key inside the image.
  * Only configuration files matching *.conf are parsed in dropin directories now.
  * Removed --qemu-headless, we now start qemu in the terminal by default and configure the serial console at
    runtime. Use the new --qemu-gui option to start qemu in its graphical interface.
  * Removed --netdev. Can be replaced by manually installing systemd-networkd, putting a network file in the
    image and enabling systemd-networkd.
  * If mkosi.extra/ or mkosi.skeleton/ exist, they are now always used instead of only when no explicit
    extra/skeleton trees are defined.
  * mkosi doesn't install any default packages anymore aside from packages required by the distro or the base
    filesystem layout package if there are no required packages. In practice, this means systemd and other
    basic tools have to be installed explicitly from now on.
  * Removed --base-packages as it's not needed anymore since we don't install any packages by default anymore
    aside from the base filesystem layout package.
  * Removed --qcow2 option in favor of supporting only raw disk images as the disk image output format.
  * Removed --bmap option as it can be trivially added manually by utilizing a finalize script.
  * The never value for --with-network was spun of into its own custom option --cache-only.
  * --bootable now defaults to auto. When set to auto, mkosi will generate a bootable image only if all
    the necessary packages are installed. Documentation was added in docs/bootable.md on how a bootable image
    can be generated on mainstream distros.
  * The RPM db is no longer rebuilt in bdb format on CentOS Stream 8. To be able to install packages on a
    CentOS Stream 8 image with a RPM db in sqlite format, rewrite the db in bdb format using
    rpm --rebuilddb --define _db_backend bdb.
  * Repositories are now only written to /etc/apt/sources.list if apt is installed in the image.
  * Removed the dependency on debootstrap to build Ubuntu or Debian images.
  * Apt now uses the keyring from the host instead of the keyring from the image. This means
    debian-archive-keyring or ubuntu-archive-keyring are now required to be installed to build Debian or
    Ubuntu images respectively.
  * --base-image is split into --base-tree and --overlay.
  * Removed --cache-initrd, instead, use a prebuilt initrd with Initrds= to avoid rebuilding the initrd all
    the time.
  * Disk images are now resized to 8G when booted to give some disk space to play around with in the booted
    image.
  * Removed --install-directory= option. This was originally added for caching the installation results, but
    this doesn't work properly as it might result in leftover files in the install directory from a previous
    installation, so we have to empty the directory before reusing it, invalidating the caching, so the option
    was removed.
  * Build scripts are now executed on the host. See the SCRIPTS section
    in the manual for more information. Existing build scripts will need
    to be updated to make sure they keep working. Specifically, most paths
    in scripts will need to be prefixed with $BUILDROOT to have them
    operate on the image instead of on the host system. To ensure the host
    system cannot be modified when running a script, most host directories
    are mounted read-only when running a script to ensure a script cannot
    modify the host in any way. Alternatively to making the script run on
    the host, the script can also still be executed in the image itself by
    putting the following snippet at the top of the script:
    if [ "$container" != "mkosi" ]; then
        exec mkosi-chroot "$SCRIPT" "$@"
    fi
  * Removed --tar-strip-selinux-context= option. We now label all files
    properly if selinux is enabled and if users don't want the labels,
    they can simply exclude them when extracting the archive.
  * Gentoo is now marked as experimental and unsupported and there's no
    guarantee at all that it will work. Issues related to gentoo will
    generally not receive attention from core maintainers. All gentoo
    specific hacks outside of the gentoo implementation module have been
    removed.
  * A verb documentation has been added. Calling mkosi with this verb will show
    the documentation. This is useful when running mkosi during development to
    always have the documentation in the correct version available. By default it
    will try several ways to output the documentation, but a specific option can
    be chosen with the --doc-format option. Distro packagers are encouraged to
    add a file mkosi.1 into the mkosi/resources directory of the Python
    package, if it is missing, as well es install it in the appropriate search
    path for man pages. The man page can be generated from the markdown file
    mkosi/resources/mkosi.md e.g via pandoc -t man -s -o mkosi.1 mkosi.md.
  * The man page can be generated from the markdown file via
    tools/make-man-page.sh.
  * Fixed issue where not all packages and data files where included in
    the generated python package.
  * mkosi doesn't try to unshare the network namespace anymore when it
    doesn't have CAP_NET_ADMIN.
  * Fixed issue when the workspace was located in /tmp.
  * Don't try to run timedatectl or ssh-add when they're not installed.
- update to v14:
  * mkosi now creates distro~release subdirectories inside the build, cache
    and output directories for each distro~release combination that is
    built. This allows building for multiple distros without throwing away
    the results of a previous distro build every time.
  * The preferred names for mkosi configuration files and directories are
    now mkosi.conf and mkosi.conf.d/ respectively. The old names
    (mkosi.default and mkosi.default.d) have been removed from the docs but
    are still supported for backwards compatibility.
  * plain_squashfs type images will now also be named with a .raw suffix.
  * tar type images will now respect the --compress option.
  * Pacman's SigLevel option was changed to use the same default value as
    used on Arch which is SigLevel = Required DatabaseOptional. If this
    results in keyring errors, you need to update the keyring by running
  * Support for CentOS 7 was dropped. If you still need to support CentOS 7,
    we recommend using any mkosi version up to 13.
  * Support for BIOS/grub was dropped. because EFI hardware is widely
    available and legacy BIOS systems do not support the feature set to
    fully verify a boot chain from firmware to userland and it has become
    bothersome to maintain for little use.
  * To generate BIOS images you can use any version of mkosi up to mkosi 13
    or the new --bios-size option. This can be used to add a BIOS boot
    partition of the specified size on which grub (or any other bootloader)
    can be installed with the help of mkosi's script support (depending on
    your needs most likely mkosi.postinst or mkosi.finalize). This method
    can also be used for other EFI bootloaders that mkosi intentionally does
    not support.
  * mkosi now unconditionally copies the kernel, initrd and kernel cmdline
    from the image that were previously only copied out for Qemu boot.
  * mkosi now runs apt and dpkg on the host. As such, we now require apt and
    dpkg to be installed on the host along with debootstrap in order to be
    able to build debian/ubuntu images.
  * Split dm-verity artifacts default names have been changed to match what
    systemd and other tools expect: image.root.raw, image.root.verity,
    image.root.roothash, image.root.roothash.p7s (same for usr variants).
  * mkosi will again default to the same OS release as the host system when
    the host system uses the same distribution as the image that's being
    built.
  * By default, mkosi will now change the owner of newly created directories
    to SUDO_UID or PKEXEC_UID if defined, unless --no-chown is used.
  * If systemd-nspawn v252 or newer is used, bind-mounted directories with
    systemd-nspawn will use the new rootidmap option so files and
    directories created from within the container will be owned by the
    actual directory owner on the host.
- update to version 13:
  - The `--network-veth` option has been renamed to `--netdev`. The old name made
    sense with virtual ethernet devices, but when booting images with qemu a
    TUN/TAP device is used instead.
  - The network config file installed by mkosi when the `--netdev` (previously
    `--network-veth`) option is used (formerly
    `/etc/systemd/network/80-mkosi-network-veth.network` in the image) now only
    matches network interfaces using the `virtio_net` driver. Please make sure
    you weren't relying on this file to configure any network interfaces other
    than the tun/tap virtio-net interface created by mkosi when booting the image
    in QEMU with the `--netdev` option. If you were relying on this config file
    to configure other interfaces, you'll have to re-create it with the correct
    match and a lower initial number in the filename to make sure
    `systemd-networkd` will keep configuring your interface, e.g. via the
    `mkosi.skeleton` or `mkosi.extra` trees or a `mkosi.postinst` script.
  - The `kernel-install` script for building unified kernel images has been
    removed. From v13 onwards, on systems using `kernel-install`, `mkosi` won't
    automatically build new unified kernel images when a kernel is updated or
    installed. To keep the old behavior, you can install the `kernel-install`
    script manually via a skeleton tree; a copy can be found
    [here](https://github.com/systemd/mkosi/blob/3798eb0c2ebcdf7dac207a559a3cb5a65cdb77b0/mkosi/resources/dracut_unified_kernel_install.sh).
  - New `QemuKvm` option configures whether to use KVM when running `mkosi qemu`.
  - `mkosi` will not default to the same OS release as the host system anymore
    when the host system uses the same distribution as the image that's being
    built. Instead, when no release is specified, mkosi will now always default
    to the default version embedded in mkosi itself.
  - `mkosi` will now use the `pacman` keyring from the host when building Arch
    images. This means that users will, on top of installing `archlinux-keyring`,
    also have to run `pacman-key --init` and `pacman-key --populate archlinux` on
    the host system to be able to build Arch images. Also, unless the package
    manager is configured to do it automatically, the host keyring will have to
    be updated after `archlinux-keyring` updates by running `pacman-key
    --populate archlinux` and `pacman-key --updatedb`.
  - Direct qemu linux boot is now supported with `BootProtocols=linux`. When
    enabled, the kernel image, initrd, and cmdline will be extracted from the
    image and passed to `qemu` by `mkosi qemu` to directly boot into the kernel
    image without a bootloader. This can be used to boot for example s390x images
    in `qemu`.
  - The initrd will now always be rebuilt after the extra trees and build
    artifacts have been installed into the image.
  - The github action has been migrated to Ubuntu Jammy. To migrate any jobs
    using the action, add `runs-on: ubuntu-22.04` to the job config.
  - All images are now configured by default with the `C.UTF-8` locale.
  - New `--repository-directory` option can be used to configure a directory with
    extra repository files to be used by the package manager when building an
    image. Note that this option is currently only supported for `pacman` and
    `dnf`-based distros.
  - Option `--skeleton-tree` is now supported on Debian-based distros.
- Enable build on aarch64
- update to version 12:
  - Fix handling of baselayout in Gentoo installations.
- update to version 11:
  - Support for Rocky Linux, Alma Linux, and Gentoo has been added!
  - A new `ManifestFormat=` option can be used to generate "manifest" files that
    describe what packages were installed. With `json`, a JSON file that shows
    the names and versions of all installed packages will be created. With
    `changelog`, a longer human-readable file that shows package descriptions and
    changelogs will be generated. This latter format should be considered
    experimental and likely to change in later versions.
  - A new `RemovePackages=` option can be used to uninstall packages after the
    build and finalize scripts have been done. This is useful for the case where
    packages are required by the build scripts, or pulled in as dependencies
    for scriptlets of other packages, but are not necessary in the final image.
  - A new `BaseImage=` option can be used to build "system extensions" a.k.a.
    "sysexts" — partial images which are mounted on top of an existing system
    to provide additional files under `/usr/`. See the
    [systemd-sysext man page](https://www.freedesktop.org/software/systemd/man/systemd-sysext.html)
    for more information.
  - A new `CleanPackageMetadata=` option can be used to force or disable the
    removal of package manager files. When this option is not used, they are
    removed when the package manager is not installed in the final image.
  - A new `UseHostRepositories=` option instructs mkosi to use repository
    configuration from the host system, instead of the internal list.
  - A new `SshAgent=` option configures the path to the ssh agent.
  - A new `SshPort=` option overrides the port used for ssh.
  - The `Verity=` setting supports a new value `signed`. When set, verity data
    will be signed and the result inserted as an additional partition in the
    image. See https://systemd.io/DISCOVERABLE_PARTITIONS for details about
    signed disk images. This information is used by `systemd-nspawn`,
    `systemd-dissect`, `systemd-sysext`, `systemd-portabled` and `systemd`'s
    `RootImage=` setting (among others) to cryptographically validate the image
    file systems before use.
  - The `--build-environment=` option was renamed to `--environment=` and
    extended to cover *all* invoked scripts, not just the `mkosi.build`.
    The old name is still understood.
  - With `--with-network=never`, `dnf` is called with `--cacheonly`, so that the
    package lists are not refreshed. This gives a degree of reproducibility when
    doing repeated installs with the same package set (and also makes installs
    significantly faster).
  - The `--debug=` option gained a new value `disk` to show information about disk
    sized and partition allocations.
  - Some sections and settings have been renamed for clarity: [Packages] is now
    [Content], `Password=`, `PasswordIsHashed=`, and `Autologin=` are now in
    [Content]. The old names are still supported, but not documented.
  - When `--prepare-script=`/`--build-script=`/`--finalize-script=` is used with
    an empty argument, the corresponding script will not be called.
  - Python 3.7 is the minimal supported version.
  - Note to packagers: the Python `cryptography` module is needed for signing
    of verity data.
- Update to version 10
- update to version 5
 * no changelog available
 * merged upstream
- update to version 4
 * no changelog available
 * removed 109.patch, merged upstream
- initial package
- Add 109.patch from pull request at upstream repository, workaround for boo#1049997 and missing support for https URLs in mkosi/zypper

• Files Changed
• Browse Source