Overview
Request 1113752 accepted
- Update to 3.0.0:
* Updated ccast/axTLS to get ChromCast working again with latest Google CC
operating software.
* Extensive re-write/re-factor of icclib to make it more future-proof.
See https://www.argyllcms.com/doc/ChangesSummary.html for details.
* Added ref/ColorCheckerPassport.ti2 and ref/ColorCheckerHalfPassport.ti2
to allow measuring ColorCheckerPassport with instrument.
* Fixed bug in Munki spectro hi-res mode with some instruments. Luminance
matching between normal and hi-res was sometimes quite poor.
* Added ARGYLL_CREATE_DISPLAY_PROFILE_WITHOUT_CHAD environment variable.
* Changed colprof -U flag to -u. Changed dispcal -J flag to -K to accommodate
a potential new flag for colprof and dispcal.
* Added workaround for bug in madHcNet64.dll32/64.dll which sometimes causes
failure.
* Added delay after USB set_config on OS X to help Spyder 3/4 on Ventura OS.
* Added -Y parameter to dispwin to override automatic patch delay.
* Changed i1d3 driver to cope with Rev. B "0x83" error robustly. This should
fix any issues measuring low level Red only patch values on OLED displays,
but with slower measurements when this occurs.
* Added spotread -Y S option to save spectral sensitivity curves and added
corresponding support in i1d3 driver. This allows for comparison of different
instruments factory calibrations.
* Added a -h scale parameter to dispread, to allow the automatic instrument
calibration test patch values to be scaled down from their default 100%
value. This is useful with HDR displays.
* Added manifest to MSWindows executables to use UTF-8 code pages on Windows
1903 and later. This should improve non-ASCII filename and path handling.
* Added a Violet colorant to the targen colorant list.
* Fixed problem with OS X 64 bit backwards compatibility where it failed to
locate serial instruments when the binaries are run on OS X V12 or latter
machines.
* Fixed bug in i1Pro3 driver where it was not returning the correct
measurement conditions enum.
* Fixed spotread so that ambient measure for monochrome sources doesn't error
out due to bad CCT/VCT/VDT. Also change -T so that it suppresses CCT etc. if
ambient mode is used.
* Added hacky workaround to strange Mac M2/rosetta bug in del_i1proimp().
- Make the argyllcms-doc package noarch.
Request History
ateixeira created request
- Update to 3.0.0:
* Updated ccast/axTLS to get ChromCast working again with latest Google CC
operating software.
* Extensive re-write/re-factor of icclib to make it more future-proof.
See https://www.argyllcms.com/doc/ChangesSummary.html for details.
* Added ref/ColorCheckerPassport.ti2 and ref/ColorCheckerHalfPassport.ti2
to allow measuring ColorCheckerPassport with instrument.
* Fixed bug in Munki spectro hi-res mode with some instruments. Luminance
matching between normal and hi-res was sometimes quite poor.
* Added ARGYLL_CREATE_DISPLAY_PROFILE_WITHOUT_CHAD environment variable.
* Changed colprof -U flag to -u. Changed dispcal -J flag to -K to accommodate
a potential new flag for colprof and dispcal.
* Added workaround for bug in madHcNet64.dll32/64.dll which sometimes causes
failure.
* Added delay after USB set_config on OS X to help Spyder 3/4 on Ventura OS.
* Added -Y parameter to dispwin to override automatic patch delay.
* Changed i1d3 driver to cope with Rev. B "0x83" error robustly. This should
fix any issues measuring low level Red only patch values on OLED displays,
but with slower measurements when this occurs.
* Added spotread -Y S option to save spectral sensitivity curves and added
corresponding support in i1d3 driver. This allows for comparison of different
instruments factory calibrations.
* Added a -h scale parameter to dispread, to allow the automatic instrument
calibration test patch values to be scaled down from their default 100%
value. This is useful with HDR displays.
* Added manifest to MSWindows executables to use UTF-8 code pages on Windows
1903 and later. This should improve non-ASCII filename and path handling.
* Added a Violet colorant to the targen colorant list.
* Fixed problem with OS X 64 bit backwards compatibility where it failed to
locate serial instruments when the binaries are run on OS X V12 or latter
machines.
* Fixed bug in i1Pro3 driver where it was not returning the correct
measurement conditions enum.
* Fixed spotread so that ambient measure for monochrome sources doesn't error
out due to bad CCT/VCT/VDT. Also change -T so that it suppresses CCT etc. if
ambient mode is used.
* Added hacky workaround to strange Mac M2/rosetta bug in del_i1proimp().
- Make the argyllcms-doc package noarch.
factory-auto added opensuse-review-team as a reviewer
Please review sources
factory-auto accepted review
Check script succeeded
licensedigger accepted review
ok
darix accepted review
Accepted review for by_group opensuse-review-team request 1113752 from user factory-auto
dimstar_suse set openSUSE:Factory:Staging:K as a staging project
Being evaluated by staging project "openSUSE:Factory:Staging:K"
dimstar_suse accepted review
Picked "openSUSE:Factory:Staging:K"
anag+factory accepted review
Staging Project openSUSE:Factory:Staging:K got accepted.
anag+factory approved review
Staging Project openSUSE:Factory:Staging:K got accepted.
anag+factory accepted request
Staging Project openSUSE:Factory:Staging:K got accepted.