- Update to v4.15.0-1 (jsc#SLE-15968)
- New Supported Devices
- ConnectX-6Lx adapter cards support.
- BlueField-2 adapter cards support.
- mstconfig tool
- QOS ets configuration ConnectX-4 LX 25NIC failed when enabled VFs > 21
- Network programmability (Dynamic Flex Parse) Packet classification on
eCPRI header on receive with DPDK
- Improved BlueField NVMf Performance when working in 4K block size
[BlueField SmartNIC] Support full virtio-net PCI device emulation +
Device Hot Plug - BareMetal case GA
- ConnectX-6 SHARPv2 to achieve line-rate performance
- New Feature - BOOT_INTERRUPT_DIS parameter was added to mlxconfig.
When TRUE, legacy interrupts should not be used for receive/transmit indication.
Polling should be used instead.
- mstdump tool
- Fixed an issue that caused mstflint to print garbage messages.
To fix the bug, the new kernel module should be recompiled and loaded
- mstreg tool
[software steering, ASAP^2, Connection Tracking] adding DP_HASH support
- Virtual output Queuing - exposing descriptors
- New Feature - Increased the registry keys the tool supports and now it exposes the full PRM.
- For additional information, refer to the PRM.
- mstlink tool
- need mstlink to support TX SerDes set --database at Quantum and Spectrum-2
- QSFP DD + CMIS
- mstlink - support for 400G
- mstlink to enforce PRBS at host-management and/ or multi-host systems
- mstlink - add support to configure PRBS
- Read/Write SerDes Tx taps with new SLTP register - mstlink
- Fix the return bad status of SLTP according to the new return values
- New Feature - HDR lane rate is now supported when in Pseudorandom Binary Sequence (PRBS) mode.
- New Feature - Added support for switching between NRZ/PAM4 speeds for new devices that support
- HDR/200G speeds (ConnectX-6, ConnectX-6 Dx, Mellanox Quantum, Mellanox Spectrum 2).
- mstfwreset tool
- handling mstfwreset on SN in different modes
- mstflint tool
[Secure Boot][BlueField-2] EFUSE keys burn tool (Arm OS) for RSA Keys and MKEK
- Support HPCC in CX6Dx
- Add life cycle, secure boot, recovery indications to the flint query full command
- New Feature - Enables the user to insert information manually to the flash on components
such as MFG/DEV GUID/MAC when no information exists after the burn process using the command
"mstflint -d \ sg \".
If the information is not inserted manually, the existing GUID/MAC
- information will be used instead.
- New Feature - Enables the user to query the MFA2 file using a PSID.
- mstresourcedump tool
- MSTResoruceDump new tool: Build a dump passer tool for parsing resource dumps
- Added support for "--virtual-hca-id" command. Now the tool can provide info on the virtual HCA
(host channel adapter, NIC) ID.