baserev update by copy to link target

• Files Changed
• Browse Source

- Update to 1.6.1 18.09.2023
  * Bugfixes:
    Battery:
      - LG Gram laptops: ensure lg-legacy is used for kernel <= 5.17 (Issue #708)
    General:
      - tlp-stat -s: report manual mode despite restrictive umask (Issue #702)
- Update to 1.6.0 24.08.2023
  * Features
    Battery:
      - LG Gram laptops:
        - Use standard sysfs attribute 'charge_control_end_threshold'
          provided by kernel 5.18 and newer
        - Restore threshold after hibernate
      - System76 laptops with open source EC firmware:
        start and stop threshold
      - System76: default start threshold set to 90% (due to EC firmware change)
      - ThinkPads: model detection adapted for Libreboot (Issue #679)
      - Toshiba/Dynabook laptops: stop threshold 80/100%
    Configuration:
    - Allow comments (#) after parameters (Issue #598)
    - tlp-stat -c/--cdiff: append a notice to deprecated or removed
      parameters
    Disks:
    - SATA_LINKPWR_ON_AC/BAT: remove fallbacks for outdated kernels
      before 4.15 from defaults (still available via explicit configuration)
    General:
    - Allow coexistence with power-profiles-daemon: do not apply
      PLATFORM_PROFILE_ON_AC/BAT, CPU_ENERGY_PERF_POLICY_ON_AC/BAT and
      CPU_BOOST_ON_BAT/BAT when it is running
    - MEM_SLEEP_ON_AC/BAT: change system suspend mode
    - Add ZSH command completion
    - tlp-stat -s:
      - Silence warnings about unmasked systemd-rfkill.service/.socket
        when DEVICES_TO_ENABLE/DISABLE_ON_STARTUP is actually unconfigured
      - Show EC firmware version
      - Show system suspend mode
      - Show proper ThinkPad model string with Libreboot (Issue #679)
    PCI(e) devices:
      - RUNTIME_PM_ENABLE/DISABLE: apply even when RUNTIME_PM_ON_AC/BAT
        is disabled (Issue #614)
    Processor:
      - CPU_DRIVER_OPMODE_ON_AC/BAT: set CPU scaling driver operation mode
        (active, guided, passive); amd-pstate/intel_pstate driver required
      - CPU_DRIVER_OPMODE_ON_AC/BAT: check if operation mode is actually
        supported by the current CPU driver
      - CPU_ENERGY_PERF_POLICY_ON_AC/BAT: support AMD Zen 2 or newer CPUs;
        kernel 6.3 with amd-pstate driver in active mode required
      - CPU_HWP_DYN_BOOST_ON_AC/BAT: *EXPERIMENTAL* support AMD Zen 2 or
        newer CPUs; yet unreleased kernel 6.x and amd-pstate driver
        in active mode required
      - SCHED_POWERSAVE_ON_AC/BAT removed (unavailable since kernel 3.5)
      - tlp-stat -p:
        - Show amd-pstate operation mode, dynamic boost and performance
          attributes
        - Show min/max operating frequency the processor can run at
          (cpuinfo_min/max_freq) and limit imposed by the BIOS (bios_limit)
        - (-v) Show acpi_cppc performance and frequency attributes
    Radio Devices:
    - Support Thunderbolt docks to switch radio devices
    - DEVICES_TO_ENABLE/DISABLE_ON_SHUTDOWN: *DEPRECATED* feature will be
      removed in TLP 1.7
    USB:
    - USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN: *DEPRECATED* feature will be
      removed in TLP 1.7
  * Bugfixes
    Configuration:
    - Strip trailing blanks from unquoted parameter values
    Operation:
    - Deactivate AHCI_RUNTIME_PM and PCIE_ASPM before suspend to avoid
      resume freezes (Issue #593, #606, #698)
    Processor:
    - Set governor although not listed in scaling_available_governors
- Revert moving 99tlp-rdw-nm from user specific directory since 1.6.0 installs
  it to vendor specific directory /usr/lib/NetworkManager/dispatcher.d

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Moved 99tlp-rdw-nm from user specif directory
  /etc/NetworkManager/dispatcher.d to vendor specific directory
  /usr/lib/NetworkManager/dispatcher.d. So, users changes can
  still be done in /etc and will not be overwritten by an update.

• Files Changed
• Browse Source

- Fix SourceURL (misplaced space) for Factory submission

• Files Changed
• Browse Source

Update to the latest version 1.5.0

• Files Changed
• Browse Source

- Fix bsc#1181279, bsc#1179635, bsc#1177313 - Failed to preset 
  unit: Unit file tlp-sleep.service does not exist.

• Files Changed
• Browse Source

- Fix bsc#1181279, bsc#1179635 - Failed to preset unit: Unit file
  tlp-sleep.service does not exist.

• Files Changed
• Browse Source

- package bash completions for tlp-rdw in the corresponding 
  sub-package (bsc#1180496)
- add tlp-rpmlintrc to mark some rpmlint warnings as known good
- Fix bsc#1181279 - Failed to preset unit: Unit file tlp-sleep.service
  does not exist.
- As tlp somehow conflicts with rfkill and power-profiles-daemon 
  running at the same time, lets mask these services, when tlp is 
  installed. ...and obviously unmask them again on uninstall.
- Require at least NetworkManager >= 1.20 
- define _udev(,rules)dir, if not already set (for Leap)
- Pre-Require systemd (and BuildRequire systemd-rpm-macros) for 
  completeness
- tlp is not activated per default (bsc#1183235), as it may conflict
  with other Laptop mode tools. At the moment, users have to manually
  activate the service via 'sudo systemctl enable --now tlp.service'

• Files Changed
• Browse Source

Update to 1.4.0 

• Files Changed
• Browse Source

- Don't recommend bbswitch, there's no relation to tlp (boo#1190631)

• Files Changed
• Browse Source

- tlp-sleep.service does not exist anymore
- Make %files section a bit more precise

• Files Changed
• Browse Source

Please review carefully. The proposed change allows me to control ThinkPad Carbon X1 4th Gen battery without installation of acpi_call from third party repos. But I am not sure whether it works for others as well.
- Recommend bbswitch for ThinkPad battery charge control instead of
  acpi-call or tp-smapi not present in the distribution.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Use the same value for TLP_ULIB in the %build phase and the
  %install phase (boo#1180495):
  + BuildRequire pkgconfig(udev)
  + Use pkg-config --variable udev_dir udev for the value of
    TLP_ULIB.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Properly install udev files to /usr/lib/udev, NOT /usr/libexec
  (boo#1177313).

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Update to 1.3.1
  * default CPU_ENERGY_PERF_POLICY_ON_BAT=power too aggressive (issue#460)

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source